Hi,
I'm setting up a network for my new office.
Here is the schema
subir imagenes gratis
Let me explain it
1. The main modem in on the 2nd floor which is connected to linksys wrt160n Wireless Router. All the set up is done via this wireless router. DHCP server is enabled and it works well.
2. The wireless router is connected to a hub, which will be the main hub. This is a standar D'link hub. From this hub, the connections are separated to lower and upper floor. On the same floor, there is 2nd hub, which connected to main hub and used to connect the client PCs (about 10 computers) via LAN Cable.
3. On the first floor, there are 2 PCs connected to main hub via LAN Cable and 1 Belkin wireless router.
4. On 3rd floor, there are 5PCs connected to main hub via LAN cable and 1 D'link wireless router.
5. On 4th floor, there is 3rd hub, connected to main hub and there are about 8 PCs connected to this 3rd hub. There is also a Linksys WRT54G V1 wireless router connected to the 3rd hub.
Everything works well.
All the other router except main router works as AP, I set the IP to be a different one. The main wireless router IP is 192.168.1.1, the others are 192.168.2.1, 192.168.3.1, 192.168.4.1.
All the DHCP Server on non-main router is disabled.
Now the problem occurs everytime I connected the WRT54G wireless router to the cable. Everytime I connected the Wireless router and restart all the modem. Some PCs on 2nd and 4th floor which using LAN Cable will connected to the WRT54G on the 4th floor and can't access the internet at all. These happens on random PCs. Sometimes it works well. On these not working PC, I tried to access the router setting by typing 192.168.1.1 in the browser and it opens the WRT54G router setting page while others PC which works well will open WRT60N (main router) router setting page.
If I disconnect the WRT54G router, all the connection will works well but sometimes PCs using LAN cable will hit RTO randomly.
My questions are :
1. What's wrong with the WRT54G router? The setup is the same with the other routers. I tried using custom firmware like ddwrt and it's still not working well
2. Is it a good way to setup connection like in the schema?
Thanks
Btw, sorry for my confusing English, I'm not a native speaker
I'm setting up a network for my new office.
Here is the schema
subir imagenes gratis
Let me explain it
1. The main modem in on the 2nd floor which is connected to linksys wrt160n Wireless Router. All the set up is done via this wireless router. DHCP server is enabled and it works well.
2. The wireless router is connected to a hub, which will be the main hub. This is a standar D'link hub. From this hub, the connections are separated to lower and upper floor. On the same floor, there is 2nd hub, which connected to main hub and used to connect the client PCs (about 10 computers) via LAN Cable.
3. On the first floor, there are 2 PCs connected to main hub via LAN Cable and 1 Belkin wireless router.
4. On 3rd floor, there are 5PCs connected to main hub via LAN cable and 1 D'link wireless router.
5. On 4th floor, there is 3rd hub, connected to main hub and there are about 8 PCs connected to this 3rd hub. There is also a Linksys WRT54G V1 wireless router connected to the 3rd hub.
Everything works well.
All the other router except main router works as AP, I set the IP to be a different one. The main wireless router IP is 192.168.1.1, the others are 192.168.2.1, 192.168.3.1, 192.168.4.1.
All the DHCP Server on non-main router is disabled.
Now the problem occurs everytime I connected the WRT54G wireless router to the cable. Everytime I connected the Wireless router and restart all the modem. Some PCs on 2nd and 4th floor which using LAN Cable will connected to the WRT54G on the 4th floor and can't access the internet at all. These happens on random PCs. Sometimes it works well. On these not working PC, I tried to access the router setting by typing 192.168.1.1 in the browser and it opens the WRT54G router setting page while others PC which works well will open WRT60N (main router) router setting page.
If I disconnect the WRT54G router, all the connection will works well but sometimes PCs using LAN cable will hit RTO randomly.
My questions are :
1. What's wrong with the WRT54G router? The setup is the same with the other routers. I tried using custom firmware like ddwrt and it's still not working well
2. Is it a good way to setup connection like in the schema?
Thanks
Btw, sorry for my confusing English, I'm not a native speaker