Sign in with
Sign up | Sign in
Your question

New Build, No Display, No Beep, No POST/BIOS

Tags:
  • BIOS
  • Display
  • Components
  • New Build
Last response: in Components
Share
September 28, 2014 10:01:59 AM

So I finally assembled my PC today (out of all new parts) and already had to temporarily replace the PSU.

So when I power it on, all of her fans light up and spin, HDD works, CD drive opens and closes, and the GPU fan works. I've breadboarded it three times and am about to go jump it.

Though also while it's on, I get no display, no beeps from the speaker... Nothing. I'm up for any suggestions.
Here's the specs:

- Asus M5A97 r2.0 LE AM3+ (no onboard Graphics)
- CoolerMaster hyper 212 evo
- AMD FX 8320 8 core AM3+
- Seagate 7200 rpm 1TB HDD
- Ye olde CD combo drive w/ NO interface cable... Just power
- Corsair vengeance (2x4) 8GB RAM 1866MHz
- I was going to use an EVGA 1000w 80Gold module, but the thing was DOA::: so I used a Rosewill 530w (peaks at 630)
- sapphire Radeon R9 290 4GB 512 bit

NOTES:::

During the installation of the CPU I got the tiniest bit of Arctic Silver 5 on the green and pins and proceeded to panic and clean it like no tomorrow...

GPUs box recommends at least a 700w PSU

I have no onboard graphics and can only connect with an HDMI.

Have a hunch that it's a Mobo issue

:::
Thanks for any help!



More about : build display beep post bios

!