Sign in with
Sign up | Sign in
Your question

"ethernet" doesnt have a valid ip configuration

Tags:
  • Powerline
  • Networking
  • Configuration
  • Ethernet Card
Last response: in Networking
Share
September 28, 2014 1:54:07 PM

So ive tried this already
http://www.tomshardware.com/faq/id-2079064/ethernet-doe...
Here is the situation, i just moved, i had no connectivity problems before. I use powerline for my ethernet connection. I have no knowledge about my roomates router/modem, my powerline is simply plugged into one of the ethernet slots and into the wall. When i try to troubleshoot the issue i get "ethernet" doesnt have a valid ip configuration.

I have a usb>wifi device which works fine.

More about : ethernet doesnt valid configuration

September 28, 2014 7:02:39 PM

Windows IP Configuration

Host Name . . . . . . . . . . . . : Wintermute-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Ethernet:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet
Physical Address. . . . . . . . . : BC-5F-F4-98-1F-C9
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::fd78:b116:fe1:50db%3(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.80.219(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 264003572
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1B-AC-06-DB-BC-5F-F4-98-1F-C9

DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{33417415-8593-4480-AF5B-D3C3F0803695}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
m
0
l
September 30, 2014 8:33:15 AM

Try hooking up your system directly to the router. If that works, go over the power line manual and try to re-set it all up since that is the issue if the system works fine directly on the router. Your plugs may also not work with the powerline adapter, they have to be on the same circuit.
m
0
l
September 30, 2014 8:37:19 PM

hang-the-9 said:
Try hooking up your system directly to the router. If that works, go over the power line manual and try to re-set it all up since that is the issue if the system works fine directly on the router. Your plugs may also not work with the powerline adapter, they have to be on the same circuit.


That was actually my first assumption, that the wall sockets were not connected with each other, i have no way to verify this though. Its kind of difficult for me to jack in directly as i dont have a long ethernet cable and the router is in my roomates room, but ill try to get it done and get back to you.
m
0
l
!