motherboard showing debug code

Toggle sidebar Toggle sidebar
I

iliyas12

Honorable
Feb 2, 2014
7
0
10,510
hello sir
few past days i were facing panic problem with my motherboard..
motherboard asrock fm2a85x exterem 6
processor amd a10 6800k
ram g skill 8gb
cabinet coolermaster
and cooler evo hypo 1
when i start my pc it show bug codes on motherboard b3 and b4 and 35 and my pc start late it take a time around 6 min for on window screen....
i rested cmos but nothing is happen and there is nothing usb plug in system..
i also formatted system but problem is still there..
and now i am facing addition problem that in bios my cpu temp start from 45 c and go on upto 80 c and my pc going in start again ...
please any body give me solution of this problem
 
Solution
unknownofprob
To add to above, make sure the CPU is orientated the correct way (I know it sounds impossible to actually pull down the lever with the CPU in the wrong way, but on that socket the CPU can be locked in the socket even when in the wrong orientation. These "b3 and b4 and 35" errors are often from the CPU, though it differs from board to board. Also, as listed above check the manual what exactly they mean.
Sort by date Sort by votes
unknownofprob

unknownofprob

Illustrious
Oct 3, 2013
8,409
0
38,960
To add to above, make sure the CPU is orientated the correct way (I know it sounds impossible to actually pull down the lever with the CPU in the wrong way, but on that socket the CPU can be locked in the socket even when in the wrong orientation. These "b3 and b4 and 35" errors are often from the CPU, though it differs from board to board. Also, as listed above check the manual what exactly they mean.
 
Upvote 0 Downvote
Solution
I

iliyas12

Honorable
Feb 2, 2014
7
0
10,510


sir can u tell me what is the cpu orientation,,,...............
 
Upvote 0 Downvote
I

iliyas12

Honorable
Feb 2, 2014
7
0
10,510
and one more info i gave u which i done ... that i never used alcohlic solution for removing ordinary thermal paste ...i used only newspaper's paper....

is there any effect on processor...
 
Upvote 0 Downvote
unknownofprob

unknownofprob

Illustrious
Oct 3, 2013
8,409
0
38,960
Is there any residue on the CPU itself?

Looking at ASRock error codes -

B3- Not listed and unknown- may be their code saying you have an error.

B4 - USB devices - Please try removing all USB devices.

35 - Problem exists with memory. ASRock say - Please re-install the CPU and memory then clear CMOS. If the problem still exists, please install only one memory module or try using other memory modules.
 
Upvote 0 Downvote
I

iliyas12

Honorable
Feb 2, 2014
7
0
10,510


ya i knowed about these codes already and i done it.... i cleared cmos and there is no device in my system which is usb related issue...
b3 mean there is system reset error....
yet i don't get solution sir
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom