Sign in with
Sign up | Sign in
Your question

My Custom-Pc won't display anything.

Tags:
  • Display
  • Graphics
Last response: in Graphics & Displays
Share
September 29, 2014 9:14:01 AM

I just built a custom pc and it won't display anything on the screen.
The monitor works and I don't have a system speaker so I haven't heard any beep codes. I have plugged the 6 pin power in to the graphics card so that isn't the problem.

My specs:
Motherboard: Asus a88xm-plus
Processor: Amd athlon x4 760k
RAM 2x 4gb crucial ballistix
Graphicscard: Sapphire Radeon r7 260x
PSU: Corsair CX500
HDD Western digital black 1tb

I have reset the CMOS and tried booting with only one ram but still no display.

Please help!?

More about : custom display

September 29, 2014 9:26:48 AM

I think you mean R7 260x. And that GPU requires a 6pin [or 4 pin, i'm not sure] power supply. If that power supply is not connected, the graphics card won't start, and therefore, you won't have image. Also, many cases come with a system speaker [mine did]. Look for it and connect it.
m
2
l
September 29, 2014 9:29:41 AM

You meant Radeon r7 260x right :) ?

Did you plug the 6 pin power connector to the graphics card?

m
0
l
September 29, 2014 12:06:38 PM

George Lazu said:
I think you mean R7 260x. And that GPU requires a 6pin [or 4 pin, i'm not sure] power supply. If that power supply is not connected, the graphics card won't start, and therefore, you won't have image. Also, many cases come with a system speaker [mine did]. Look for it and connect it.


Yes I did plug it in but I didn't get a speaker with my motherboard.
m
0
l
Related resources
!