Sign in with
Sign up | Sign in
Your question

issues with overclock

Tags:
  • Overclocking
  • Core
  • Bus Speed
Last response: in Overclocking
Share
September 29, 2014 9:37:08 AM

Hi Guys
I have fx6300 overclocked
core speed-4.407
multiplier-20.5
bus speed-215
ht-2365.07
core volt-1.404

I am crashing during gaming especially Rage but my temps on load do not go over 50c.i was previously on everything auto and just bus speed raised at 210 to achieve 4.2 with no apparent issues ,I am a bit of a loss to understand this also admit bit of a novice to overclocking

More about : issues overclock

a b K Overclocking
September 29, 2014 10:23:44 AM

Sounds like you need a tad more voltage. Be sure to be stress testing with prime for atleast a few hours before you know it's stable.
m
0
l
September 29, 2014 11:23:42 AM

thanks for reply i dropped down to 20 x multiplier and 210 bus speed achieving 4.2 seems more stable any suggestions for better overclock am on water cooling hydro 60
m
0
l
a b K Overclocking
September 29, 2014 11:49:32 AM

I don't have a ton of experience with amd, but typically when it's not stable, it needs for voltage. You have to find a balance between volts and temps to where it's acceptable under load.
m
0
l
!