Sign in with
Sign up | Sign in
Your question

ASUS R7 260x Help Needed

Tags:
  • Asus
  • GPUs
  • Graphics
Last response: in Graphics & Displays
Share
October 1, 2014 11:30:36 PM

My new ASUS R7 260x came in the mail today and i have not had any luck so far in getting it to work. I removed my old Radeon HD 6670 and all of it's drivers and installed the new card and when i turn on the pc both of the new card's fans spin up properly but my monitor displays "No Signal". I have tried updating the System Bios but that did not help. The motherboard is an IPISB CU and the computer model is a HP p7-1120. Can someone please shed some light on my issue or walk me through trouble shooting steps to get a signal when i boot the pc with the new gpu plugged in?

My pc specs:

8gb ddr3 ram
3.4ghz intel quad core.
Windows 7 64bit
500W TR2 Thermaltyke PSU

More about : asus 260x needed

October 2, 2014 3:16:01 AM

:hello: 
Is the card fixed into the slot correctly? Try removing and reinstalling the card. Also, is the display cable connected? Sometimes you tend to forget the small things that matter.
m
0
l
October 2, 2014 9:45:59 AM

YAYNEWCARD said:
:hello: 
Is the card fixed into the slot correctly? Try removing and reinstalling the card. Also, is the display cable connected? Sometimes you tend to forget the small things that matter.


Yes, the card is seated properly and the display cable is connected.
m
0
l
October 2, 2014 9:07:34 PM

HaloCOws said:
YAYNEWCARD said:
:hello: 
Is the card fixed into the slot correctly? Try removing and reinstalling the card. Also, is the display cable connected? Sometimes you tend to forget the small things that matter.


Yes, the card is seated properly and the display cable is connected.


Try resetting your BIOS to default settings by removing and reinstalling the jumper on your mobo. Alternatively, this can also be done by removing the CMOS battery. It looks like this - http://static.commentcamarche.net/en.kioskea.net/faq/im...
m
0
l
!