Sign in with
Sign up | Sign in
Your question
Solved

need help with plugging radiator fan and pump

Tags:
  • Water Cooling
  • Fan
  • Systems
  • Motherboards
Last response: in Systems
Share
October 2, 2014 5:59:19 AM

my motherboard is a msi z87-g45 and i have ordered the corsair h60 to cool my cpu

i need help on plugging the fan + pump and i don't know how to set the best settings in bios so my pump runs good. i am new at watercooling. please help

More about : plugging radiator fan pump

a b V Motherboard
October 2, 2014 6:04:57 AM

Use your manual to see which fan header is which and then when in the BIoS, be sure the pump is at 12v. The fan can be set to auto or any speed you like.
m
0
l
October 2, 2014 6:18:24 AM

i don't see any voltage option, i can't set it at 12v and i can't see at what voltage it works right now
m
0
l
Related resources
a b V Motherboard
October 2, 2014 11:48:01 AM

I have built a rig based on that board. It was watercooled also. It must list fan controls somewhere. Ill look at some picks of the BIoS and get back to ya.
m
0
l
a b V Motherboard
October 2, 2014 11:52:11 AM

Its under hardware monitor. You adjust the percentage. Just max it to 100% for that particular header.
m
1
l
October 2, 2014 12:45:57 PM

you mean i should max the thing under "Target temprature" ? or "min" and "max" fan speed?

also thank you for the reply
m
0
l

Best solution

a b V Motherboard
October 2, 2014 12:54:54 PM

Yes, you can lower the Target Temp or max the fan, either will make it run faster, but I would just run the slider up to the max.
Share
October 2, 2014 12:57:17 PM

okay mate :)  i'm gonna set both "min" and "max" fan speeds at 100 when i install the cooler! ty
m
0
l
a b V Motherboard
October 2, 2014 12:57:56 PM

You bet.
m
0
l
!