Sign in with
Sign up | Sign in
Your question
Solved

bought new PC will the cooling and motherboard be good enough for overclocking?

Tags:
  • Overclocking
  • Cooling
  • CPUs
  • Motherboards
Last response: in Overclocking
Share
October 2, 2014 3:13:19 PM

im getting this new pc and want to make sure the cooling and motherboard is good enough to overclock it up to like 4.2-4.5 here are the specs. or any other problems that might arise.


Processor 1 x AMD FX-8320 CPU (8x 3.50GHz/8MB L3 Cache)
Processor Cooling 1 x Asetek 510LC (Standard 120mm Fan)
Memory 1 x 8 GB [4 GB x2] DDR3-1866 G.SKILL RipjawsX
Video Card 1 x AMD Radeon R9 280 3GB - Single Card
Motherboard 1 x ASUS M5A97 R2.0 -- AMD 970
Power Supply 700 Watt Standard
2TB SATA 6.0Gb/s Single Drive**

More about : bought cooling motherboard good overclocking

October 2, 2014 3:16:01 PM

Should be. But why overclock?

I would test it first without overclocking. See if you even need to.

Or if you want to overclock just to say you did... I understand lol.
m
1
l
October 2, 2014 3:19:27 PM

i ordered the fx 9370 but something happened with my card so i had to reorder and seen all the stuff about people saying just get a fx 8320 and overclock it. not 100% sure im going to overclock it but just want to make sure if i change my mind i can OC without regretting not getting a couple better parts.
m
0
l
Related resources
a b K Overclocking
a b à CPUs
a b V Motherboard
October 2, 2014 10:47:31 PM

Motherboard might allow up to 4.2 depending on silicon quality of CPU. Its only 4 phases to the CPU. I max at 4.3ghz with an m5a99fx pro and hyper 212 evo and have an antec hcg 620w PSU. Maybe I lost the silicon lottery but If its an indicator of anything I doubt you'll get past 4.2 safely. I hit 75 socket and 62 package at 4.3 with heaps of case flow and pressure , and I have active vrm cooling.
m
0
l

Best solution

a b K Overclocking
a b à CPUs
a b V Motherboard
October 2, 2014 11:51:52 PM

dylanmcc said:
im getting this new pc and want to make sure the cooling and motherboard is good enough to overclock it up to like 4.2-4.5 here are the specs. or any other problems that might arise.


Processor 1 x AMD FX-8320 CPU (8x 3.50GHz/8MB L3 Cache)
Processor Cooling 1 x Asetek 510LC (Standard 120mm Fan)
Memory 1 x 8 GB [4 GB x2] DDR3-1866 G.SKILL RipjawsX
Video Card 1 x AMD Radeon R9 280 3GB - Single Card
Motherboard 1 x ASUS M5A97 R2.0 -- AMD 970
Power Supply 700 Watt Standard
2TB SATA 6.0Gb/s Single Drive**


Personally I would go for a better motherboard. That one only has a 4+1 power phase for the CPU, and that CPU is very power hungry, especially when you overclock. I'd recommend a Gigabyte 990FXA-UD5 which has a superb 8+2 power phase and is less likely to go tits up on you.
Share
October 3, 2014 5:41:47 PM

AdmiralDonut said:
dylanmcc said:
im getting this new pc and want to make sure the cooling and motherboard is good enough to overclock it up to like 4.2-4.5 here are the specs. or any other problems that might arise.


Processor 1 x AMD FX-8320 CPU (8x 3.50GHz/8MB L3 Cache)
Processor Cooling 1 x Asetek 510LC (Standard 120mm Fan)
Memory 1 x 8 GB [4 GB x2] DDR3-1866 G.SKILL RipjawsX
Video Card 1 x AMD Radeon R9 280 3GB - Single Card
Motherboard 1 x ASUS M5A97 R2.0 -- AMD 970
Power Supply 700 Watt Standard
2TB SATA 6.0Gb/s Single Drive**


Personally I would go for a better motherboard. That one only has a 4+1 power phase for the CPU, and that CPU is very power hungry, especially when you overclock. I'd recommend a Gigabyte 990FXA-UD5 which has a superb 8+2 power phase and is less likely to go tits up on you.



k im able to get this one for a little cheaper actually. it look better? and do i need a 700 watt psu or could i get away with a 600 and save some money.

CPU: AMD FX-8320 3.50 GHz Eight-Core
HDD: 2TB (2TBx1) SATA-III 6.0Gb/s 64MB Cache 7200RPM HDD (Single Drive)
MEMORY: 8GB (4GBx2) DDR3/2133MHz Dual Channel Memory (ADATA XPG V3)
MOTHERBOARD: GIGABYTE 990FXA-UD3 AMD 990 ATX
VIDEO: XFX Double D AMD Radeon R9 280 3GB GDDR5 PCIe 3.0 x16 Video Card [+13] (Single Card)
FAN: Cooler Master Seidon 120M Liquid Cooling CPU Cooler - Enhance Cooling Performance [-3] (Dual Standard 120MM Fans (Push-Pull)
m
0
l
October 3, 2014 6:10:48 PM

found a 800 watt psu for 10$ more than the 600 so just went with that.
m
0
l
a b K Overclocking
a b à CPUs
a b V Motherboard
October 4, 2014 12:30:09 AM

dylanmcc said:
AdmiralDonut said:
dylanmcc said:
im getting this new pc and want to make sure the cooling and motherboard is good enough to overclock it up to like 4.2-4.5 here are the specs. or any other problems that might arise.


Processor 1 x AMD FX-8320 CPU (8x 3.50GHz/8MB L3 Cache)
Processor Cooling 1 x Asetek 510LC (Standard 120mm Fan)
Memory 1 x 8 GB [4 GB x2] DDR3-1866 G.SKILL RipjawsX
Video Card 1 x AMD Radeon R9 280 3GB - Single Card
Motherboard 1 x ASUS M5A97 R2.0 -- AMD 970
Power Supply 700 Watt Standard
2TB SATA 6.0Gb/s Single Drive**


Personally I would go for a better motherboard. That one only has a 4+1 power phase for the CPU, and that CPU is very power hungry, especially when you overclock. I'd recommend a Gigabyte 990FXA-UD5 which has a superb 8+2 power phase and is less likely to go tits up on you.



k im able to get this one for a little cheaper actually. it look better? and do i need a 700 watt psu or could i get away with a 600 and save some money.

CPU: AMD FX-8320 3.50 GHz Eight-Core
HDD: 2TB (2TBx1) SATA-III 6.0Gb/s 64MB Cache 7200RPM HDD (Single Drive)
MEMORY: 8GB (4GBx2) DDR3/2133MHz Dual Channel Memory (ADATA XPG V3)
MOTHERBOARD: GIGABYTE 990FXA-UD3 AMD 990 ATX
VIDEO: XFX Double D AMD Radeon R9 280 3GB GDDR5 PCIe 3.0 x16 Video Card [+13] (Single Card)
FAN: Cooler Master Seidon 120M Liquid Cooling CPU Cooler - Enhance Cooling Performance [-3] (Dual Standard 120MM Fans (Push-Pull)


That motherboard will do you just fine. Much better power phase and still allows for crossfire/sli later if you want it. Good find there :) 
m
0
l
!