http://pcpartpicker.com/p/h22KnQ using the stock rear one and 2 120mm fans top exhaust and 2 120 intake front fans how should i also position the psu and cpu cooler
How should i set up these fans
- Thread starter aronian
- Start date
Solution
- Apr 22, 2009
- 43,150
- 411
- 131,790
You can either have the cooler fan blowing up to exhaust or to the rear to exhaust, your choice. The TX-3 can be positioned either way thanks to the slotted base. You won't see any major difference either way. The warm air will exit easily.
The only possible issue that might occur with have 2 x 120mm exhaust fans that close to the cooler's intake fan, is that the 120s may overpower the TX-3's fan and cause it to lose air flow. As a result, I would probably have the TX-3 blow up towards the 2 x 120mm fans.
Or forgo the added exhaust fans.
The only possible issue that might occur with have 2 x 120mm exhaust fans that close to the cooler's intake fan, is that the 120s may overpower the TX-3's fan and cause it to lose air flow. As a result, I would probably have the TX-3 blow up towards the 2 x 120mm fans.
Or forgo the added exhaust fans.
- Apr 22, 2009
- 43,150
- 411
- 131,790
Pointing? The fan blows into/through the heat sink. When I say mount it so the fan blows upward towards the top exhaust fans, that would put the fan under the heatsink, blowing through it, and out into the top exhaust fans. Capisce?
TRENDING THREADS
-
-
-
Question how to remove toolkit.telemetry.cachedClientID on FireFox
- Started by 131rg45w412
- Replies: 10
Facebook
Twitter
Instagram