ASUS Raedon HD 5450 Help !! Please

ExperienceCap

Reputable
Oct 3, 2014
3
0
4,510
Hi i hope somebody can help i am trying to install a ASUS Raedon HD 5450 2gb into my build currently it runs through the on board graphics card i have tried turning off the on board and installing my new card, i have also tried modifying the bios to support legacy and turning off a windows boot option which i was told was another solution, i have tried re installing the card multiple times.
The problem is when i start up my computer after adding the card i do not receive any signal from the card to my monitor i have also tried using the on board whilst having the new card installed however i still get no signal, when i remove the new card i receive signal from the on board graphics. I have tried installing the drivers separate with the card un-installed however receive errors because obviously the card is not there my specs are here :

CPU Intel(R) Celeron(R) CPU 1037U @ 1.80GHz
Chipset
Northbridge Intel Ivy Bridge rev. 09
Southbridge Intel MM70 rev. 04
Memory Type DDR3
Memory Size 6 GBytes
Channels Dual
Memory Frequency 798.1 MHz (1:6)
Mainboard Model NM70-M (0x0000017C - 0x005EA3A0)
PSU: http://www.novatech.co.uk/products/components/ad-e750ae-a6.html

Trying to Install: ASUS Raedon HD 5450 2GB
 

ExperienceCap

Reputable
Oct 3, 2014
3
0
4,510


Dont Know if this will help:


BIOS Version/Date American Megatrends Inc. 4.6.5, 16/12/2013
SMBIOS Version 2.7
BIOS Mode UEFI