Adding another 8GB 2x4 to get 16GB

Cuso

Reputable
Jul 28, 2014
124
0
4,680
I was asking and wondering about this and actually need a good and positive answer back is that I just bought a 8GB 2x4 kit HyperX Fury blue rams 3 weeks ago and was thinking of getting another 8GB 2x4 HyperX fury blue ram kit to get 16GB for editing, is this ok or will it cause some failures or something else? I'm worried that it won't work well or even worse.
 
Solution
Totally unsure, the general rule with DRAM is mixing sets can be and often is problematic....but unlike most all sticks, the Fury line is based on PnP rather than XMP, it's suppose to just be plug and play - don't know if Kingston will guarantee mixing sets or not, the DRAM manufacturers won't on XMP based sticks....might send a PM to KingstonHQ that's their rep here in the forums and ask, and if you do let us know what they say

justaguywithagun

Distinguished
Dec 14, 2009
430
0
18,960
assuming the next mem kit you buy has the same memclock/spd/voltage as the initial mem kit, and also assuming you dont happen to get a random faulty stick of ram, then yes it will work fine.

if you want more ram, add another hyperx kit like what you have. if theres an issue with system stability (it sometimes happens) its no big deal. we can help you troubleshoot any issues. just make sure your mobo can handle 4x8gb first..


even worst case scenario, theres a DOA stick in the new kit no damage will come to your otherhardware. the system would simply crash or not boot
 

Tradesman1

Legenda in Aeternum
Totally unsure, the general rule with DRAM is mixing sets can be and often is problematic....but unlike most all sticks, the Fury line is based on PnP rather than XMP, it's suppose to just be plug and play - don't know if Kingston will guarantee mixing sets or not, the DRAM manufacturers won't on XMP based sticks....might send a PM to KingstonHQ that's their rep here in the forums and ask, and if you do let us know what they say
 
Solution

Cuso

Reputable
Jul 28, 2014
124
0
4,680
Yeah it's going to be all the same nothing different from it same brand same color and clockspeed etc. I was not sure if it's ok or not but thanks for the big help everyone. My Mobo is the Gigabyte GA z77x UD3H
 

kingstonhq

Honorable
Mar 11, 2013
329
0
11,160
Hi, I'm Jewel with Kingston Technical Support. Since your motherboard is dual channel, as long as the memory kits are the same model and each pair is installed in the paired slots there should be no issue.

Thanks for choosing HyperX :)
 

Cuso

Reputable
Jul 28, 2014
124
0
4,680
Thanks so much for all your help I was curious about it because after watching Linus video explaining it and maybe i didn't really understand it as well but now i do because of you guys help.