Sign in with
Sign up | Sign in
Your question

No Signal on monitor

Tags:
  • Windows XP
  • Monitors
Last response: in Windows XP
Share
October 5, 2014 11:04:52 AM

I'm trying to use my secondary monitor as primary but it says no signal. I don't have the primary monitor anymore. What do I need to do? Thanks so much for any input.

More about : signal monitor

October 5, 2014 12:18:49 PM

while your pc is off, disconnect all the cables just leave the power to the case than turn on your monitor before you plug it in your graphic card, it should say no signal right?
then without turning on the pc try to plug it in, and see if the monitor gets the signal.
m
0
l
October 5, 2014 12:35:43 PM

I did what you said and its says no signal.
m
0
l
Related resources
October 5, 2014 12:41:46 PM

When I disconnected the cable. It did say disconnected cable.
m
0
l
October 5, 2014 12:48:26 PM

i had this problem but, my case was like my whole pc was failing, i mean my mobo was the reason, but lemme know no problem with pc right? i mean does it boot up as it should?
m
0
l
October 5, 2014 12:56:46 PM

It's turns on but the power button is red not green
m
0
l
October 7, 2014 2:16:08 AM

if you have any other graphic card try to change and see if you still won't get signal.
m
0
l
October 7, 2014 5:28:42 PM

I don't have another graphic card
m
0
l
October 8, 2014 2:56:29 AM

wiccagirl2000 said:
It's turns on but the power button is red not green


Hey,
What do you mean by It turns on but the power button is red not green?
m
0
l
October 8, 2014 5:08:08 AM

When I turn on the tower it turns green like it should then blinks red then nothing
m
0
l
!