Sign in with
Sign up | Sign in
Your question

First build - compatibility and fitting

Tags:
  • Cooler Master
  • Components
  • Seasonic
  • Noctua
  • MSI
  • Compatibility
Last response: in Components
Share
October 5, 2014 11:57:33 AM

Hi,

I am planning to make my first real build using the following components:

http://azerty.nl/winkelmandje/winkelmandje/?legen=1&pro...

I was wondering if all these parts were compatible and most of all if the Seasonic PSU has the correct (and sufficient) pins for the GPU. Furthermore I wonder if the Noctua fits on the motherboard, given the used RAM and if everything fits nicely in the casing.

Any advice concerning parts that I might improve on are always welcome!!!

Thanks in advance!

More about : build compatibility fitting

October 5, 2014 12:08:55 PM

You are good.
The Seasonic is a outstanding psu with all the connectors you need, and more.

The Noctua is a very large cooler and one of the best.
I think noctua has a motherboard compatibility support section, but You should have no problem.
The ram is sufficiently low profile to not interfere with the cooler.
m
1
l
October 5, 2014 12:26:32 PM

geofelt said:
You are good.
The Seasonic is a outstanding psu with all the connectors you need, and more.

The Noctua is a very large cooler and one of the best.
I think noctua has a motherboard compatibility support section, but You should have no problem.
The ram is sufficiently low profile to not interfere with the cooler.



OK thanks!

One more thing: is the Noctua sufficient if I plan to OC the 4690k to 4.4-4.5?
m
0
l
!