Sign in with
Sign up | Sign in
Your question

Sata Cable plugged pls help

Tags:
  • SATA
  • Boot
  • Motherboards
  • Cable
Last response: in Motherboards
Share
October 8, 2014 1:28:55 PM

Hi. One of my friends pulled out one cable of 2 i think sata cable from my graphic board. I have asus z82 deluxe. I am very low at this things but I added again my sata cable and when i start my computer, i have this message :

The current bios settings do not fully support the boot device.
Go to Advanced > Boot > CSM parameters and ajust the CSM setings to enable te boot device.

Please help me, I have CSM enabled, help me to fix this thing

More about : sata cable plugged pls

a b V Motherboard
October 8, 2014 1:36:34 PM

You have probably plugged the HDD into a different SATA port to the one it was connected to before.

Go into your BIOS. Somewhere you'll be able to specify what devices to boot from and in which order your PC checks these devices for Operating System information.

You should have your CD / DVD drive as the first boot device. You should then specify your HDD (the one you have your Operating System installed on) as the second device in the list.

When your PC boots it will check your CD / DVD drive for an Operating System Disc. If it doesn't find one it will then check for an installed Operating System on your specified HDD.
m
0
l
October 9, 2014 3:52:48 AM

I can't find boot devices, i dont know what he did but now i cant find them. Another suggestions ?
m
0
l
October 13, 2014 12:24:16 PM

I solved it, you can close this topic. Another cable was pulled out, nothing bad :) 
m
0
l
Related resources
!