Hyper 212 EVO + Antec Gx500 illusion case
Tags:
-
Components
- Evo
- Antec
-
Cooling
-
Motherboards
-
Cases
Last response: in Components
sitnie
October 8, 2014 5:59:28 PM
antec support
October 8, 2014 11:34:05 PM
The cooler master TX3 will fit. It's not as good as the 212 EVO, but it fits and it's better than the stock cooler.
http://www.newegg.com/Product/Product.aspx?Item=N82E168...
http://www.newegg.com/Product/Product.aspx?Item=N82E168...
-
Reply to darkbreeze
m
0
l
Related resources
- Hyper 212 EVO + Antec One Illusion case - Forum
- Hyper 212 evo + Antec Gx500 - Forum
- Will a Coolermaster 212 Evo fit in my Antec 300 Illusion case? - Forum
- antec gx500 and 212 evo - Forum
- will the cooler master hyper 212 evo fit in the antec one gaming case - Forum
Do you have a particular budget you need to adhere to for the cooler or can you go with something a bit more expensive than the Hyper 212 EVO? There are several very, very good downdraft cpu coolers that will easily fit and will give you as good or better performance as the 212 but there are no coolers shorter than 158mm that fits that criteria and performs as well for the same price or less. That's why the 212 is so popular.
-
Reply to darkbreeze
m
0
l
You're too narrow by 1 millimeter - serious bummer.
A heatsink that is basically a shorter equivalent of the Hyper 212 for the same price is the AR02 by Silverstone:
http://www.newegg.com/Product/Product.aspx?Item=N82E168...
That case reminds me a lot of the Antec 300, by the way - one of the best laid out and easiest cases to work with that I've ever had.
A heatsink that is basically a shorter equivalent of the Hyper 212 for the same price is the AR02 by Silverstone:
http://www.newegg.com/Product/Product.aspx?Item=N82E168...
That case reminds me a lot of the Antec 300, by the way - one of the best laid out and easiest cases to work with that I've ever had.
-
Reply to capt_taco
m
0
l
Except that it doesn't fit any of the standard sized cpu coolers which are almost all either 159 or 160mm. What a bummer. I bought a Bitfenix Comrade case a while back, which I really liked as well for the price, but it was also 1mm too short to fit the EVO. Pissed me off, but it was my own fault for not checking first. If you haven't bought the case yet, it might make a lot more sense and cost less cash, to get a case wide enough to accommodate the EVO, than to buy a decent cooler short enough to fit the case.
-
Reply to darkbreeze
m
0
l
darkbreeze said:
Except that it doesn't fit any of the standard sized cpu coolers which are almost all either 159 or 160mm. What a bummer. I bought a Bitfenix Comrade case a while back, which I really liked as well for the price, but it was also 1mm too short to fit the EVO. Pissed me off, but it was my own fault for not checking first. If you haven't bought the case yet, it might make a lot more sense and cost less cash, to get a case wide enough to accommodate the EVO, than to buy a decent cooler short enough to fit the case. ^^^ That's probably the right call. There are some OK coolers with a lower profile, but you're really restricted in what you can choose if the case is that size, because heatsinks with 120mm or bigger fans are almost all going to be a hair too tall. It's a shame, even a centimeter or two would have made all the difference.
Down at 92mm, the choices are pretty much settle for a pretty-good cooler, or spend a ton of money.
If you already have the case, I would say just go with either of the two coolers mentioned in this thread and don't worry too much. As long as you don't push it too far with overclocking, you still shouldn't have heat problems.
-
Reply to capt_taco
m
0
l
sitnie
October 9, 2014 5:01:20 PM
wow 1mm short... i saw another post and apparently it will fit, and the 158 mm maximun was including the fan on the side? but im still not sure..
http://www.tomshardware.com/answers/id-2304741/hyper-21...
this is where i saw that
http://www.tomshardware.com/answers/id-2304741/hyper-21...
this is where i saw that
-
Reply to sitnie
m
0
l
Geofelt is wrong. Of course the cooler will "fit" inside the case, but the side panel will not go back on without being bent outward a tad bit. You don't want that. I had that issue with the Bitfenix Comrade and with the tops of the heat pipes touching the side panel at all, not only does the side panel not fit, but the fan on the cpu cooler sends vibrations up the heat pipes into the side panel that makes a racket that will drive you up the wall.
-
Reply to darkbreeze
m
0
l
And for a completely weird situation:
The Antec ONE case lists max cooler height at 155mm. http://www.antec.com/product.php?id=704923&fid=4&lan=us
However, the Hyper 212 PLUS at 159mm fits just fine. 3mm to spare, even discounting the side bulge. Including the side bulge, about 10-12mm to spare.
Either Antec changed the actual size of the case since I bought it, or someone is off a bit with the ruler
I am NOT saying that your case and that cooler will work, though.
The Antec ONE case lists max cooler height at 155mm. http://www.antec.com/product.php?id=704923&fid=4&lan=us
However, the Hyper 212 PLUS at 159mm fits just fine. 3mm to spare, even discounting the side bulge. Including the side bulge, about 10-12mm to spare.
Either Antec changed the actual size of the case since I bought it, or someone is off a bit with the ruler
I am NOT saying that your case and that cooler will work, though.
-
Reply to USAFRet
m
0
l
sitnie
October 9, 2014 5:55:09 PM
Also i did more research and there are some pictures, that show it installed + side window on
http://www.tomshardware.com/answers/id-2298239/antec-gx...
http://www.tomshardware.com/answers/id-2298239/antec-gx...
-
Reply to sitnie
m
0
l
Best solution
http://ca.pcpartpicker.com/parts/case/?compatible_with=...
Doesn't show as compatible on partpicker.
Doesn't show as compatible on partpicker.
-
Reply to SR-71 Blackbird
Share
sitnie
October 9, 2014 6:09:46 PM
SR-71 Blackbird said:
http://ca.pcpartpicker.com/parts/case/?compatible_with=...Doesn't show as compatible on partpicker.
ugh i ment to reply but i chose u as best solution by accident..... but pc part picker may be incorrect since these pictures show otherwise
http://www.tomshardware.com/answers/id-2298239/antec-gx...
-
Reply to sitnie
m
0
l
sitnie
October 9, 2014 6:16:12 PM
-
Reply to USAFRet
m
0
l
sitnie
October 9, 2014 6:26:14 PM
USAFRet said:
sitnie said:
SR-71 Blackbird said:
1mm < Can go either way , it will fit for some , others it won't fit.so chances are it won't fit for me? but it will fit for another person, off of other variables such as differences in cases, and maybe their motherboard ?
That is a possibility, yes.
i see, well heres my pc http://pcpartpicker.com/p/8KGkbv
and if it won't fit, what are some equivalent alternatives to the hyper 212 evo?
-
Reply to sitnie
m
0
l
sitnie
October 9, 2014 6:51:27 PM
sitnie said:
Also i was watching a video, about the hyper212 evo, and this guy fit it in his zalman 1, which is a 199mm (w) case, so i should be able to install it since mine is 8.1 inches and his is around 7.83Overall case width means little. How much space is between the mounted CPU face and the opposite interior side is what matters.
2 different 199mm cases...one may work, one won't.
-
Reply to USAFRet
m
0
l
sitnie
October 9, 2014 7:00:41 PM
sitnie said:
Also i did more research and there are some pictures, that show it installed + side window onhttp://www.tomshardware.com/answers/id-2298239/antec-gx...
Then USAFret is correct in that Antec doesn't have any employees that know how to measure, probably not including the one who replied first to this post. No offense to Antec employees, they don't all work in that department and are just going off the same provided measurements as the rest of us.
Or, as also mentioned, there has been a revision that included new dimensions that didn't make it onto the specs page. It doesn't seem that likely though as the max supported cooler height was the reported spec, not the case dimensions. And that info comes right from the Antec site where it clearly states max height is 158mm. I think it's probable the side panel has been revised to fit taller coolers but the listing of specs was never changed. Just a guess.
-
Reply to darkbreeze
m
0
l
Related resources
- SolvedWill a hyper 212 evo fit inside of an antec 300 case with a 970a-g46 motherboard? Forum
- Cooler Master Hyper 212 EVO & Antec 900 case Forum
- WILL HYPER 212 EVO FIT INTO A ANTEC 302 CASE? Forum
- Will Hyper 212 EVO fit in older Antec P180B case? Forum
- Hyper212 evo in an Antec 900v2 case? Forum
- Solved212 Evo + Antec 300 Illusion Forum
- Antec Gaming One Illusion plus Hyper 212 plus? Forum
- SolvedAntec Kuhler 950 or Cooler master hyper 212 evo Forum
- SolvedAntec Kuhler Flow or Coolermaster Hyper T4 or CM Hyper 212 turbo/evo Forum
- SolvedHYPER 212 EVO in Antec VSK-4000? Forum
- SolvedWill the cooler master hyper 212 evo fit in this case? Forum
- SolvedCoolMaster Hyper 212 Evo Antec Fans Forum
- SolvedCan a Hyper EVO 212 fit in my case? Forum
- SolvedWill the Cooler Master Hyper 212 Evo fit my case? Forum
- SolvedCan this case fit a Cooler Master Hyper 212 EVO? Forum
- More resources
Read discussions in other Components categories
!