Sign in with
Sign up | Sign in
Your question
Solved

AI suite gives me an warning saying my CPU gets too much voltage

Tags:
  • Sabertooth
  • Motherboards
  • CPUs
Last response: in Motherboards
Share
October 9, 2014 12:22:12 PM

I have an Sabertooth x79 motherboard, and with AI suite I get an warning saying it gets too much voltage, also the sensors say the same thing when I open the monitoring.
I have been getting this for the past few days so I am starting to get worried.
Intel i7 processor

More about : suite warning cpu voltage

a b V Motherboard
a b à CPUs
October 9, 2014 1:37:47 PM

I do NOT hope you set the CPU voltage at 2.112 volts... It'll FRY your chip!
m
0
l
a c 174 V Motherboard
a c 189 à CPUs
October 9, 2014 2:02:00 PM

What PSU do you have?
m
0
l
October 9, 2014 2:31:25 PM

tiny voices said:
What PSU do you have?


OCZ ModXStream Pro W700
m
0
l
a c 174 V Motherboard
a c 189 à CPUs
October 9, 2014 3:22:05 PM



zeyuanfu said:
I do NOT hope you set the CPU voltage at 2.112 volts... It'll FRY your chip!


The reading on the 12v rail has NOTHING to do with the CPU voltage. Sorry.
m
0
l

Best solution

a c 174 V Motherboard
a c 189 à CPUs
October 9, 2014 3:23:27 PM

Op, if the 12v was really only at 2v there is no way the system would even run. If the system works perfectly fine as normal, something is wrong with the software that reads the voltage.

The System would crash as soon as you put any kind of load on it with only 2v on the 12v rail.
Share
!