Sign in with
Sign up | Sign in
Your question

fan xpert 2 and cosair h110 cooler

Tags:
  • Cooling
  • Fan
  • CPUs
  • Motherboards
Last response: in Motherboards
Share
October 10, 2014 6:22:09 AM

Beginner question, I have the nxzt case with the seven fan setup, the corsair h110 sitting on my 15 and the asus z87a board I the fan control for the radiator cooler is on cpu fan 4 the other connector which seems to be coming out of the cooling part itself is hooked to cpu fan 1 then I have the top fan hooked to cpu opt and the front fan cpu fan 2 side fan cpu 3 all three pins I can hear it spinning up all fans they all past the test my two questions are I understand the one hook up runs the fan to cook the radiator what does the other hook up to the cosair do and second does fan expert 2 run well with water coolers, any advice or suggestions would be great again I'm still learning

More about : fan xpert cosair h110 cooler

a b V Motherboard
October 10, 2014 6:36:37 AM

Fan Expert 2 will allow you to manipulate the fans of the Corsair just as you would any other case fan.

The second connector on the H110 controls the radiator water pump allowing the flow of liquid between the cooling block and the fans.
m
0
l
October 10, 2014 8:33:43 AM

Thelps said:
Fan Expert 2 will allow you to manipulate the fans of the Corsair just as you would any other case fan.

The second connector on the H110 controls the radiator water pump allowing the flow of liquid between the cooling block and the fans.


m
0
l
a b V Motherboard
October 10, 2014 10:38:17 AM

Rowsdower82 said:
Thelps said:
Fan Expert 2 will allow you to manipulate the fans of the Corsair just as you would any other case fan.

The second connector on the H110 controls the radiator water pump allowing the flow of liquid between the cooling block and the fans.




Correction: Allowing the flow of liquid between the Cooling Block and Radiator / Fans.

Unless I didn't understand your original question correctly...

There are two fan connectors which provide power and fan-speed control.

There will also be a pump control / power connector.
m
0
l
!