I build my first pc by myself few days ago.
I have same "problems".
First my spec is:
Asus maxsimus VII hero
Intel i7 4790k
Corsair h105
Corsair Vengeance pro silver 16gb 2400mhz CL11
Corsair Carbide 540air case
Corsair RM750
I dont have gpu right now, i use intel integrated gpu
All new drivers and bios
Now my problems is:
Every day i check my temps, (bios all defaut i manualy just set xmp profile) cuz Ram is 2400mhz. At start my temps are i can say nice, i run intel burn test STANDARD mode 10 times and my temps on IDLE is 27-30c and max 74-77.
i7 4790k stock speed and i see my core voltage when is load on 4.4 is 1.211v
Next day i run intel burn test again 10 times. Idle 29-31c Max 79-83c
Again next day temps are fine like first time i wrote.
Im not use spliter for h105 fans i conect one fan in CPU-FAN,another fan in CPU-OPT, and i connected PUMP in CHA-FAN3, i disable fan control in bios for cha-fan3 and in bios rpm is 1800-1850. But in AI suite3 rmp is 1600+ ? And out from box my pump have some buzzing sound,is not loud but i hear it.
I see some lose on motherboard when i set h105 and i put on motherboard washer from h105 and is tight im sure.
Is this temp good or not ? I have new artic silver 5 premium. Maybe reaplied thermal paste? Move out washers ? Help im noob.
For monitor i use hwmonitor cpuz and realtemp, for stres i just use intel burn test.
I have same "problems".
First my spec is:
Asus maxsimus VII hero
Intel i7 4790k
Corsair h105
Corsair Vengeance pro silver 16gb 2400mhz CL11
Corsair Carbide 540air case
Corsair RM750
I dont have gpu right now, i use intel integrated gpu
All new drivers and bios
Now my problems is:
Every day i check my temps, (bios all defaut i manualy just set xmp profile) cuz Ram is 2400mhz. At start my temps are i can say nice, i run intel burn test STANDARD mode 10 times and my temps on IDLE is 27-30c and max 74-77.
i7 4790k stock speed and i see my core voltage when is load on 4.4 is 1.211v
Next day i run intel burn test again 10 times. Idle 29-31c Max 79-83c
Again next day temps are fine like first time i wrote.
Im not use spliter for h105 fans i conect one fan in CPU-FAN,another fan in CPU-OPT, and i connected PUMP in CHA-FAN3, i disable fan control in bios for cha-fan3 and in bios rpm is 1800-1850. But in AI suite3 rmp is 1600+ ? And out from box my pump have some buzzing sound,is not loud but i hear it.
I see some lose on motherboard when i set h105 and i put on motherboard washer from h105 and is tight im sure.
Is this temp good or not ? I have new artic silver 5 premium. Maybe reaplied thermal paste? Move out washers ? Help im noob.
For monitor i use hwmonitor cpuz and realtemp, for stres i just use intel burn test.