Sign in with
Sign up | Sign in
Your question

ASRock x99x Killer Fatal1ty Motherboard no post

Tags:
  • x99x Killer Fatal1ty
  • ASrock
  • Motherboards
October 10, 2014 10:15:12 AM

I'm having a tough time finding any sort of thread on this motherboard since it's so new, so I'm resorting to posting my own. The Dr. Debug LED on this MB is helpful, but I still can't get the thing to work.

At first the LED was giving me the number 67. The manual says 61-91 is a chipset error and to reset the CMOS. So I unplugged the power supply, removed the battery from the motherboard, and held the CMOS reset button for 30-40 seconds.

Now when I power it up, the Dr. Debug flashes 19 and then 60 and back to 19, and continues to alternate until I power it off. The manual says that I should reinstall the CPU and try only one stick of RAM. I reinstalled the CPU but didn't clean off the thermal paste. I also took out all of the RAM and then put one back in slot A1. Then I reset the CMOS using the same procedure as before and powered on. Now I get the same error, just alternating between 19 and 60. I'm not really sure where to go from here. Anyone have any ideas?

More about : asrock x99x killer fatal1ty motherboard post

!