- Jun 24, 2014
- 3
- 0
- 4,510
Hi everyone, I need to have my build finished in 30hrs but I don't know where to plug these power connectors.
My specs are as follows:
i7 5930k
H80i
ASRock X99M Killer
Corsair LPX 16GB ddr4
EVO 1TB ssd
WD Black 4TB
EVGA 780 acx sc
Silverstone ST85F-GS psu
I got the 24pin cable and 2 blue 8pin pcie cables connected both ends.
However, I need to know if I can plug a cable with an 8pin end into the "EPS8PIN" to a "ATX12V1" connection with a 4+4pin end on the motherboard.
Secondly, can I use one cable with a 6 pin end, to power my h80i, hdd, and ssd, then connect it to just one of the black 6 pin "IDE&SATA" ports on the power supply?
Any help would be much appreciated.
Cheers.
My specs are as follows:
i7 5930k
H80i
ASRock X99M Killer
Corsair LPX 16GB ddr4
EVO 1TB ssd
WD Black 4TB
EVGA 780 acx sc
Silverstone ST85F-GS psu
I got the 24pin cable and 2 blue 8pin pcie cables connected both ends.
However, I need to know if I can plug a cable with an 8pin end into the "EPS8PIN" to a "ATX12V1" connection with a 4+4pin end on the motherboard.
Secondly, can I use one cable with a 6 pin end, to power my h80i, hdd, and ssd, then connect it to just one of the black 6 pin "IDE&SATA" ports on the power supply?
Any help would be much appreciated.
Cheers.
Facebook
Twitter
Instagram