I have all my pc parts ready but need help making it as it is a hugely pricey setup. (in bristol) who or where is dedicated to

Solution


go to disk management and select your HDD then select new simple volume , windows should detect it after

http://pcsupport.about.com/od/tipstricks/f/open-disk-ma.....did you try this ?

rgooch

Reputable
Sep 2, 2014
39
0
4,530
i have built it, all good, except.....my ram is only telling me i have 12gb installed, even though on bios it recognised that all 4x4 ram are using 4gb....
not sure why or what to do... help
 

rgooch

Reputable
Sep 2, 2014
39
0
4,530
yeah all same dominator platinum, 4x4gb all in right slots, a1 b1 etc.... was reading up and people said either a dud stick, cpu problem but if in bios it is recognising it why the f is it not in windows, i was thinking, would my gpu take some of that (i have a 770gtx 2gb)
 

rgooch

Reputable
Sep 2, 2014
39
0
4,530
on bios it says there 4lots of 4gb on system information it says 12gb, if i had screwed my cpu fan on too tight, surely all the sticks would not be functioning, so surely its not that, right? i might just re apply them, but im installing a few things first
 

rgooch

Reputable
Sep 2, 2014
39
0
4,530
will do, cheers for help. Also my hdd is showing up on my bios but not on windows...(this is my first build by way) even though my ssd and optical are all good on bios and windows.
 

rgooch

Reputable
Sep 2, 2014
39
0
4,530
its randomly, by itself changed and is now saying 16gb is installed lol...don't know what happened there...
Only other problems left are .....my ssd, hdd and optical are all in, bios has acknowledged them and they are all on windows under devices however on computer, it only has c drive ssd, no d drive hdd. but bios says it is there.
 

michaelhall

Reputable
Jun 1, 2014
792
0
5,160


go to disk management and select your HDD then select new simple volume , windows should detect it after

http://pcsupport.about.com/od/tipstricks/f/open-disk-ma.....did you try this ?
 
Solution