I'm building my first system and the wiring all seems correct. The system boots up but when connected to the monitor it doesn't show anything except no signal detected.
These are my parts CPU: Intel Core i5-4690K
GPU: GTX 760
Mthrbd: Gigabyte H97M D3H
Case: Corsair Carbide SPEC 03
Power: Cooler Master G550M
RAM: Kingston Fury 8GB DDR3
HDD: Western Digital Black 2TB
Monitor: BenQ VW2245/ASUS VX228H 60HZ
I've tried everything but it's still stt working. I went through the 31 steps thing that's on this page too. Please help. The motherboard only has 4 mounts which fit perfectly into the case although there are 9 holes in the motherboard. The rest of the mounts are all far too far away ffor my mobo to reach. Help.
These are my parts CPU: Intel Core i5-4690K
GPU: GTX 760
Mthrbd: Gigabyte H97M D3H
Case: Corsair Carbide SPEC 03
Power: Cooler Master G550M
RAM: Kingston Fury 8GB DDR3
HDD: Western Digital Black 2TB
Monitor: BenQ VW2245/ASUS VX228H 60HZ
I've tried everything but it's still stt working. I went through the 31 steps thing that's on this page too. Please help. The motherboard only has 4 mounts which fit perfectly into the case although there are 9 holes in the motherboard. The rest of the mounts are all far too far away ffor my mobo to reach. Help.