Over the weekend, I built a work PC. The only thing the PC is going to be used for is Microsoft Office and Internet Explorer.
Upon first boot, the PC would not boot into the BIOS nor would it send a signal to my monitor. The fans attached to the motherboard would spin, but no beeps were heard during this process. I have planned on using the onboard video outputs with the HD Radeon graphics through the CPU.
After several hours, I unplugged the reset switch front panel connector and the PC worked fine. If I plug the reset switch back into the jfp1 slot, it begins messing up again. Any thoughts on this?
Motherboard - MSI A55M-E33
Processor - AMD A10 5700 Quad-Core 4.0 GHz
RAM - Patriot Viper 3 DDR3 4GB 1600 MHz
HDD - WD Blue 1TB 7200 RPM
OS - Windows 8.1
Case - Logisys CS369BK
PSU - 480W PSU (Came pre-mounted in case)
Upon first boot, the PC would not boot into the BIOS nor would it send a signal to my monitor. The fans attached to the motherboard would spin, but no beeps were heard during this process. I have planned on using the onboard video outputs with the HD Radeon graphics through the CPU.
After several hours, I unplugged the reset switch front panel connector and the PC worked fine. If I plug the reset switch back into the jfp1 slot, it begins messing up again. Any thoughts on this?
Motherboard - MSI A55M-E33
Processor - AMD A10 5700 Quad-Core 4.0 GHz
RAM - Patriot Viper 3 DDR3 4GB 1600 MHz
HDD - WD Blue 1TB 7200 RPM
OS - Windows 8.1
Case - Logisys CS369BK
PSU - 480W PSU (Came pre-mounted in case)
Facebook
Twitter
Instagram