- Jun 10, 2012
- 28
- 1
- 18,535
Heres my crystaldiskinfo on my current drive.....note the hours on it. I don't leave it on 24/7. Turn it on when I need it, then off when I'm ready to go to bed, so about 14 hrs a day give or take. I'm really amazed it's lasted this long probably a world record or something.
Now I just ordered a WD 250gig PATA 8mb cache 7200rpm hard drive to replace this as lately when I go to turn on the computer it will start up with fans going then stop and repeat until I force it off with the power button and turn it back (it usually works) and sometimes my pc will randomly just freeze which I figured it's the hard drive failing. So when this new drive arrives and I install it into the case....what do I do after I hit the power button? Do I just throw in my Windows 7 dvd and install windows as usual or is there something special that needs to be done before hand? Thanks!
----------------------------------------------------------------------------
CrystalDiskInfo 6.2.1 (C) 2008-2014 hiyohiyo
Crystal Dew World : http://crystalmark.info/
----------------------------------------------------------------------------
OS : Windows 7 Professional SP1 [6.1 Build 7601] (x64)
Date : 2014/10/14 4:31:23
-- Controller Map ----------------------------------------------------------
+ ATA Channel 0 (0) [ATA]
- HL-DT-ST DVD+-RW GSA-H21N ATA Device
+ ATA Channel 1 (1) [ATA]
- HDS728080PLAT20 ATA Device
+ Standard Dual Channel PCI IDE Controller [ATA]
- ATA Channel 0 (0)
- ATA Channel 1 (1)
- NVIDIA nForce Serial ATA Controller [SCSI]
-- Disk List ---------------------------------------------------------------
(1) HDS728080PLAT20 : 82.3 GB [0/1/0, pd1]
----------------------------------------------------------------------------
(1) HDS728080PLAT20
----------------------------------------------------------------------------
Model : HDS728080PLAT20
Firmware : PF2OA21B
Serial Number : PFD201S2UUW2HJ
Disk Size : 82.3 GB (8.4/82.3/82.3/82.3)
Buffer Size : 1719 KB
Queue Depth : 1
# of Sectors : 160836480
Rotation Rate : Unknown
Interface : Parallel ATA
Major Version : ATA/ATAPI-7
Minor Version : ATA/ATAPI-7 T13 1532D version 1
Transfer Mode : UDMA/133 | UDMA/133
Power On Hours : 41983 hours
Power On Count : 4152 count
Temperature : 40 C (104 F)
Health Status : Caution
Features : S.M.A.R.T., APM, AAM, 48bit LBA
APM Level : 0000h [OFF]
AAM Level : 80FEh [OFF]
-- S.M.A.R.T. --------------------------------------------------------------
ID Cur Wor Thr RawValues(6) Attribute Name
01 100 100 _16 000000000000 Read Error Rate
02 100 100 _50 000000000000 Throughput Performance
03 105 105 _24 000300BF00BD Spin-Up Time
04 _99 _99 __0 000000001066 Start/Stop Count
05 100 100 __5 00000000000A Reallocated Sectors Count
07 100 100 _67 000000000000 Seek Error Rate
08 100 100 _20 000000000000 Seek Time Performance
09 _95 _95 __0 00000000A3FF Power-On Hours
0A 100 100 _60 000000000000 Spin Retry Count
0C _99 _99 __0 000000001038 Power Cycle Count
C0 _95 _95 _50 000000001786 Power-off Retract Count
C1 _95 _95 _50 000000001786 Load/Unload Cycle Count
C2 137 137 __0 004B00050028 Temperature
C4 100 100 __0 00000000000A Reallocation Event Count
C5 100 100 __0 000000000000 Current Pending Sector Count
C6 100 100 __0 000000000000 Uncorrectable Sector Count
C7 200 200 __0 000000000001 UltraDMA CRC Error Count
CrystalDiskInfo 6.2.1 (C) 2008-2014 hiyohiyo
Crystal Dew World : http://crystalmark.info/
----------------------------------------------------------------------------
OS : Windows 7 Professional SP1 [6.1 Build 7601] (x64)
Date : 2014/10/14 4:31:23
-- Controller Map ----------------------------------------------------------
+ ATA Channel 0 (0) [ATA]
- HL-DT-ST DVD+-RW GSA-H21N ATA Device
+ ATA Channel 1 (1) [ATA]
- HDS728080PLAT20 ATA Device
+ Standard Dual Channel PCI IDE Controller [ATA]
- ATA Channel 0 (0)
- ATA Channel 1 (1)
- NVIDIA nForce Serial ATA Controller [SCSI]
-- Disk List ---------------------------------------------------------------
(1) HDS728080PLAT20 : 82.3 GB [0/1/0, pd1]
----------------------------------------------------------------------------
(1) HDS728080PLAT20
----------------------------------------------------------------------------
Model : HDS728080PLAT20
Firmware : PF2OA21B
Serial Number : PFD201S2UUW2HJ
Disk Size : 82.3 GB (8.4/82.3/82.3/82.3)
Buffer Size : 1719 KB
Queue Depth : 1
# of Sectors : 160836480
Rotation Rate : Unknown
Interface : Parallel ATA
Major Version : ATA/ATAPI-7
Minor Version : ATA/ATAPI-7 T13 1532D version 1
Transfer Mode : UDMA/133 | UDMA/133
Power On Hours : 41983 hours
Power On Count : 4152 count
Temperature : 40 C (104 F)
Health Status : Caution
Features : S.M.A.R.T., APM, AAM, 48bit LBA
APM Level : 0000h [OFF]
AAM Level : 80FEh [OFF]
-- S.M.A.R.T. --------------------------------------------------------------
ID Cur Wor Thr RawValues(6) Attribute Name
01 100 100 _16 000000000000 Read Error Rate
02 100 100 _50 000000000000 Throughput Performance
03 105 105 _24 000300BF00BD Spin-Up Time
04 _99 _99 __0 000000001066 Start/Stop Count
05 100 100 __5 00000000000A Reallocated Sectors Count
07 100 100 _67 000000000000 Seek Error Rate
08 100 100 _20 000000000000 Seek Time Performance
09 _95 _95 __0 00000000A3FF Power-On Hours
0A 100 100 _60 000000000000 Spin Retry Count
0C _99 _99 __0 000000001038 Power Cycle Count
C0 _95 _95 _50 000000001786 Power-off Retract Count
C1 _95 _95 _50 000000001786 Load/Unload Cycle Count
C2 137 137 __0 004B00050028 Temperature
C4 100 100 __0 00000000000A Reallocation Event Count
C5 100 100 __0 000000000000 Current Pending Sector Count
C6 100 100 __0 000000000000 Uncorrectable Sector Count
C7 200 200 __0 000000000001 UltraDMA CRC Error Count
Now I just ordered a WD 250gig PATA 8mb cache 7200rpm hard drive to replace this as lately when I go to turn on the computer it will start up with fans going then stop and repeat until I force it off with the power button and turn it back (it usually works) and sometimes my pc will randomly just freeze which I figured it's the hard drive failing. So when this new drive arrives and I install it into the case....what do I do after I hit the power button? Do I just throw in my Windows 7 dvd and install windows as usual or is there something special that needs to be done before hand? Thanks!
Facebook
Twitter
Instagram