Sign in with
Sign up | Sign in
Your question

Have an older desktop HP p6110f and want oto add a 2 or 4 port usb 3.0 pcie expansion card....is this at all possible?

Tags:
  • Desktops
  • USB3
  • Storage
  • PCI
  • Hewlett Packard
  • Port
Last response: in Storage
Share
October 14, 2014 2:43:41 AM

Need to know if my desktop HP Model p6110f is capable of receiving a 4 port usb 3.0 pci expansion card and working and if so will the one below worK?
My PCI data:
PCI Data
Slot PCI
Slot Type PCI
Slot Usage Available
Bus Width 32 bit
Slot Designation PCI-E x16
Characteristics 3.3V, Shared, PME
Slot Number 0
Slot PCI
Slot Type PCI
Slot Usage Available
Bus Width 32 bit
Slot Designation PCI-E x1
Characteristics 3.3V, Shared, PME
Slot Number 1
Slot PCI
Slot Type PCI
Slot Usage In Use
Bus Width 32 bit
Slot Designation PCI-E x1
Characteristics 3.3V, Shared, PME
Slot Number 2
Slot PCI
Slot Type PCI
Slot Usage Available
Bus Width 32 bit
Slot Designation PCI1
Characteristics 3.3V, Shared, PME
Slot Number 3
What I want to install as a card:
Link to card: http://www.amazon.com/dp/B00B6ZCNGM/ref=wl_it_dp_o_pC_n...


Thank you soooo much.

(Edited by moderator to remove email address)

More about : older desktop p6110f oto add port usb pcie expansion card

a c 360 G Storage
a b α HP
October 14, 2014 8:15:46 AM

Unless the PC is running Windows 8 (unlikely) you'll also need a third-party USB 3.0 driver because Windows 7 & earlier versions don't have USB 3.0 support built-in.

The driver has to be supplied either by HP (unlikely as your PC is too old) or by the card manufacturer in your case.

To summarize, the card will physically fit, but without a USB 3.0 driver the USB 3.0 ports will only operate at USB 2.0 speed.
m
0
l
!