Sign in with
Sign up | Sign in
Your question
Solved

Will my gpu fir into my case?

Tags:
  • Cases
  • Graphics Cards
  • MSI
  • Graphics
Last response: in Graphics & Displays
Share
October 14, 2014 5:32:37 AM

GPU: MSI R9 270x
Cabinet: Zebronics Race (http://zebronics.com/products/cabinet-intermediate/race)

More about : gpu fir case

a b U Graphics card
October 14, 2014 5:37:42 AM

It should fit but do you have the case already ?
m
0
l
a c 1430 U Graphics card
October 14, 2014 5:38:15 AM

It will be tight if it does, since the card is a little longer than the width of a full ATX board. I suggest measuring from the back to the drive cage since the card is 10.24" or 260mm!
m
0
l
Related resources

Best solution

a c 155 U Graphics card
October 14, 2014 5:38:19 AM

The max GPU length is not specified, but the card is about 10", a bit larger than an ATX MoBo, check for the space (length wise) from PCIe x16 slot and determine if you can fit 10" there. You might need to remove some drive cages though.
Share
October 14, 2014 5:39:25 AM

Yes it will fit but Id rather get another case
m
0
l
October 14, 2014 5:44:36 AM

For the time being I'll squeeze it in, but will try to replace my cabinet in a few months. BTW thanks guyz, I didn't expect so many answers this quickly.
m
0
l
a c 155 U Graphics card
October 14, 2014 5:46:05 AM

No worries, glad to help :) 
m
0
l
October 14, 2014 5:52:38 AM

MeteorsRaining said:
No worries, glad to help :) 

I understand most of you believe it is better to change the case.
So... if I buy a "Cooler Master Elite 311 Mid Tower Cabinet", in the upcoming moths, is it better for the gpu?

m
0
l
a c 155 U Graphics card
October 14, 2014 5:53:32 AM

It's a fine case. Will allow the GPU to fit w/o worrying about drive cages, and is bigger for more airflow.
m
0
l
a c 1430 U Graphics card
October 14, 2014 5:54:04 AM

Yes the CM will fit the card having 280mm space for it to the drive bays.
m
1
l
October 14, 2014 5:56:00 AM

Thanks again guyz...
All my doubts cleared. :) 
m
0
l
a c 155 U Graphics card
October 14, 2014 5:56:25 AM

No worries, have fun.
m
0
l
!