This might be a long post, so please bear with me. I am really looking for a solution to my problem from the experts here.
Hello
It all started after I installed an additional 4 GB of Corsair Vengeance RAM a few days back.
My PC config is as follows:-
Gigabyte - GA-78LMT-USB3
AMD - FX 6100
Seagate HDD (160 + 500GB)
Radeon 5450 1GB Graphics
Corsair Vengeance - 1333 Mhz - 8 GB (the 2 sticks have been placed at slots marked as 1 and 2 respectively)
Except for the 160 GB HDD, the rest of the components are fairly new, a little over 1 year tops.
After installing the RAM and dusting the internals of my cabinet, when I started the PC it ran fine for as long as I kept it on, about 6 hrs.
The problem started on the next day when I started my PC, it just failed to boot and went into startup repair. Windows couldn't detect anything and it rebooted fine and logged into windows.
Over the next few days, the same incident occurred one of two times and the other times, Windows would start just fine.
Today evening, when I started my PC, it went into startup repair again (didn't happen this morning though) and as usual didn't detect any error and rebooted. After the reboot, when Windows reached the logo screen, the PC suddenly restarted again and this time installed a bunch of updates that was already downloaded in the morning.
After the installation of Windows updates, it logged on fine (though sluggishly, probably because of my HDD) and I went on to check the logs under Event Viewer
After then I went to see the logs in Event Viewer and following are the errors that showed up under "System" since the time I started my PC this evening (listed in descending order)
There are also a bunch of errors and warning under Application, one of the errors read:-
Does all this indicate a problem with a hardware or Windows? Since I see the mention of AMD and Processor, should I be worried that it's my processor that's taking the hit?
I ram MemTest for 2 passes and it didn't detect any problem with the RAMs. Should I run it for more passes?
Please advise
Tons of thanks in advance.
Hello
It all started after I installed an additional 4 GB of Corsair Vengeance RAM a few days back.
My PC config is as follows:-
Gigabyte - GA-78LMT-USB3
AMD - FX 6100
Seagate HDD (160 + 500GB)
Radeon 5450 1GB Graphics
Corsair Vengeance - 1333 Mhz - 8 GB (the 2 sticks have been placed at slots marked as 1 and 2 respectively)
Except for the 160 GB HDD, the rest of the components are fairly new, a little over 1 year tops.
After installing the RAM and dusting the internals of my cabinet, when I started the PC it ran fine for as long as I kept it on, about 6 hrs.
The problem started on the next day when I started my PC, it just failed to boot and went into startup repair. Windows couldn't detect anything and it rebooted fine and logged into windows.
Over the next few days, the same incident occurred one of two times and the other times, Windows would start just fine.
Today evening, when I started my PC, it went into startup repair again (didn't happen this morning though) and as usual didn't detect any error and rebooted. After the reboot, when Windows reached the logo screen, the PC suddenly restarted again and this time installed a bunch of updates that was already downloaded in the morning.
After the installation of Windows updates, it logged on fine (though sluggishly, probably because of my HDD) and I went on to check the logs under Event Viewer
After then I went to see the logs in Event Viewer and following are the errors that showed up under "System" since the time I started my PC this evening (listed in descending order)
There are also a bunch of errors and warning under Application, one of the errors read:-
Does all this indicate a problem with a hardware or Windows? Since I see the mention of AMD and Processor, should I be worried that it's my processor that's taking the hit?
I ram MemTest for 2 passes and it didn't detect any problem with the RAMs. Should I run it for more passes?
Please advise
Tons of thanks in advance.
Facebook
Twitter
Instagram