Sign in with
Sign up | Sign in
Your question
Solved

PC Build Doesn't Turn On

Tags:
  • Power Supplies
  • RAM
  • AMD
  • BIOS
  • Power Up
  • Build
  • Asus
  • Graphics Cards
  • Display
  • Systems
Last response: in Systems
Share
October 15, 2014 7:40:32 PM

So I have built my friend's PC, and now it won't turn on. It wont even show the BIOS screen. All the fans on the motherboard and on the GPU are spinning, so I know they're getting power. I really need some help.
Specs-
CPU- AMD FX 8350
Motherboard- Asus Crosshair V Formula Z
GPU- Sapphire R9 290
RAM- G Skill Sniper 8 (2x4)
PSU- Corsair CX750M
HDD- 500GB Western Digital
SSD- 128GB Sandisk
DVD- Asus DVD R/W drive
Thanks in advance guys!

More about : build turn

Best solution

a b ) Power supply
a b À AMD
a b Ĉ ASUS
a c 85 U Graphics card
October 15, 2014 7:42:18 PM

Try troubleshooting with this guide:

http://www.tomshardware.com/forum/261145-31-perform-ste...

Very easy to follow. Your issue could be a number of things.

edit: heh so far all the advice mentioned is on the guide posted above... good job shortstuff_mt ;) 
Share
a b U Graphics card
October 15, 2014 7:44:05 PM

I would make sure that all the front panel connectors are connected properly first. This is usually the cause of problems.
m
0
l
Related resources
a b ) Power supply
a b U Graphics card
October 15, 2014 7:44:36 PM

Most common is seat your card in the top slot, check pcie power connector, check CPU power connector, reseat the ram
m
0
l
a b ) Power supply
a b À AMD
a b U Graphics card
October 15, 2014 7:49:35 PM

did you try booting with one RAM stick in at a time? in every configuration? Each stick in each slot (only one in at any given time) until it posts.
m
0
l
!