Sign in with
Sign up | Sign in
Your question

Segate 2T Goflex won't work

Tags:
  • Storage
  • Computers
  • Boot
  • Power
Last response: in Storage
Share
October 15, 2014 10:17:49 PM

My drive will not boot up any longer. When attached to the computer, the power light on the drive will Blink once, I can hear the drive begin to run but nothing. eventually it stops cycling. I own 2 of these drives and have tested the power pack and cable on the second drive. They work with the other drive. Before it went down, there was an error message, something about an I/O problem. Any help would be greatly appreciated.

More about : segate goflex work

a b G Storage
October 16, 2014 12:45:30 AM

have you tried changin the cables? if you have try this:
1) remove the HDD from the external casing
2) directly connect it to the sata port in the motherboard.
then run seagate diagnostic's tool(seatools here http://www.seagate.com/support/downloads/item/seatools-...) to check if the drive is ok if it is then the external casing is busted.
m
0
l
!