Sign in with
Sign up | Sign in
Your question

How do I setup this GPU for my computer?

Tags:
  • GPUs
  • Computers
  • Intel i5
  • Graphics
Last response: in Graphics & Displays
Share
October 16, 2014 2:44:23 PM

http://www.gigabyte.com/products/product-page.aspx?pid=...

downloaded driver and installed but dont know how to select this as GPU it is using my i5 4690K integrated graphics right now.

I also downloaded utility but it keeps saying: Please confirm whether to support this VGA card!

More about : setup gpu computer

October 16, 2014 3:01:05 PM

Did you install the power PCIE cables from your power supply to the graphic card if any?
Did you connect your monitor to your graphic card, not your motherboard?
What power supply do you have?
m
0
l
October 16, 2014 3:42:55 PM

Suztera said:
Did you install the power PCIE cables from your power supply to the graphic card if any?
Did you connect your monitor to your graphic card, not your motherboard?
What power supply do you have?


I got it working but now the display is not fitting screen and the quality dropped a lot.
m
0
l
Related resources
18 minutes ago

Go into AMD CCC. Look for the Scaling options tab and drag the slider to 0%.
What you are describing is overscanning the display.
m
0
l
17 minutes ago

Suztera said:
Go into AMD CCC. Look for the Scaling options tab and drag the slider to 0%.


That fixed size but not quality. This monitor is 60Hz and 1080p but the quality is still bad.
m
0
l
16 minutes ago

TheKolapo00 said:
Suztera said:
Go into AMD CCC. Look for the Scaling options tab and drag the slider to 0%.


That fixed size but not quality. This monitor is 60Hz and 1080p but the quality is still bad.


What do you mean quality? Is the text not clear? Are you sure it is at 0%?
What cable are you using? What monitor are you using?
m
0
l
8 minutes ago

First of all, where is your display connected to? the new gpu or directly to the motherboard?
Second, make sure you into your motherboard's bios to select the primary VGA adapter as the PCI-E device.
Third. How do you know its using the on board and not the gpu? Question 1 will help answer. But If you are connect to the GPU and your system is not using it as the graphic processor then you will not get anything on your screen. However instead you have "crappy quality" which doesn't indicate that your GPU is not in use. For even your on board graphics will get you to boot windows and they should look 99% identical either way.

Could it be that your screen resolution is off?
m
0
l
less than a minute ago

homiezheadsup said:
First of all, where is your display connected to? the new gpu or directly to the motherboard?
Second, make sure you into your motherboard's bios to select the primary VGA adapter as the PCI-E device.
Third. How do you know its using the on board and not the gpu? Question 1 will help answer. But If you are connect to the GPU and your system is not using it as the graphic processor then you will not get anything on your screen. However instead you have "crappy quality" which doesn't indicate that your GPU is not in use. For even your on board graphics will get you to boot windows and they should look 99% identical either way.

Could it be that your screen resolution is off?


I go on minecraft and it shows what GPU you are using. The quality is just blury and a little pixelated. The HDMI is plugged into my GPU it was plugged into the motherboard and the quality was amazing but then I wanted to use my graphic card so I installed the drivers and switched the HDMI to my GPU.
m
0
l
!