NZXT Full Tower Case Fans

Chase Goodman

Reputable
Oct 17, 2014
23
0
4,510
I recently did some cable management to my PC, and after that my case fans aren't running. They were running smoothly before I did cable management. Also the LED light worked before and now it doesn't. I know something is probably unplugged or not in all the way but I've been looking for a while and can't come up with a solution. Does anyone know what cable would cause the Fans and the LEDs to stop working?
 
Solution
The easiest solution is to follow the cable from the fans that aren't working to either the fan controller on the case or to the motherboard. Once you trace them back, just push them in to make sure they're plugged in all the way.

It's very possible in moving cables around that the fan cables got pulled slightly. Typically they don't click into place and are just resting on 3 or 4 pins.

Calvin3200

Reputable
Mar 10, 2014
326
0
4,860
The easiest solution is to follow the cable from the fans that aren't working to either the fan controller on the case or to the motherboard. Once you trace them back, just push them in to make sure they're plugged in all the way.

It's very possible in moving cables around that the fan cables got pulled slightly. Typically they don't click into place and are just resting on 3 or 4 pins.
 
Solution

Chase Goodman

Reputable
Oct 17, 2014
23
0
4,510


I checked all of the cables still plugged in on the Motherboard (I don't know if I accidentally unplugged one) and they are in all the way
 

Chase Goodman

Reputable
Oct 17, 2014
23
0
4,510
I figured it out, I went through every single one of the cables and I saw a matching Male and Female cable. Male cable coming from the PSU so I put them together and then it started working. So I guess I unplugged it while tugging on the wires to organize them. Thanks for your taking your time to help me though!