New to building PC's

keolaman1983

Reputable
Oct 18, 2014
1
0
4,510
I think I have installed everything correctly. No signal on monitor. All the fans are spinning cpu and video card. Disk drive and cd drives both spin. No beeps on speaker. What can I do to find the problem.
System Specs
corsair cx750 Watt Power supply
i5 4670 3.4 ghz 6mb
msi ddr3 2600nlga 1150 z97-g45 motherboard
msi amd radeon r9270x gaming 2gb gddr5 video card
corsair vengeance blue 8gb (2x4gb) pc3 12800 1600mhz ddr3 240-pin ram
 
Solution
Hi -
Here's where I'd start.

1) Make sure everything has power and is plugged into the right slot. Re-seat all of the cards. I know, I know, but I can't tell you how many times it's been one of these things that killed me.

2) I'd try to eliminate some of the components and see if you can get the system to POST. Take out the video card and plug the monitor into the MOBO. Take out one of the RAM sticks. Once you get it working, add one part at a time back in until you're up and running or you've found the problem.

Hope this helps,
-GorfTheFrog

GorfTheFrog

Distinguished
Aug 12, 2009
183
1
18,815
Hi -
Here's where I'd start.

1) Make sure everything has power and is plugged into the right slot. Re-seat all of the cards. I know, I know, but I can't tell you how many times it's been one of these things that killed me.

2) I'd try to eliminate some of the components and see if you can get the system to POST. Take out the video card and plug the monitor into the MOBO. Take out one of the RAM sticks. Once you get it working, add one part at a time back in until you're up and running or you've found the problem.

Hope this helps,
-GorfTheFrog
 
Solution