Does a PCIe 3.0 (x16) graphics card work with a PCIe 1.0 (x16) or a PCIe 3.0 (x1)?

UKickAss

Distinguished
Jul 17, 2013
97
1
18,645
Hi, i thought it was about time that i bought a new graphics card. So, i done some research and found out that the GTX 750ti would best suit me due to its very cheap price and the tremendous amount of power that it packs.

But it said that its interface is a PCIe 3.0 (x16). I went into my computers specifications and discovered that my PC only has a PCIe 1.0 (x16) slot as well as a PCIe 3.0 (x1) slot.

Will the graphics card support these slots?

Thanks in advance!
 
Solution
Thanks, well back to my original post then :) Yes the 750Ti should work fine in the 1.0 x16 slot, it is not really a high performance card so it should not saturate the bus very much at all. Just FYI, PCIe slots and PCIe cards are all upward and backward comparable, as long as the physical slot is the same as the card edge connecter.

endeavour37a

Honorable


I figured the same thing, that's why I asked him for some MB info :)
 

UKickAss

Distinguished
Jul 17, 2013
97
1
18,645


http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=5187019&spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03261061-8%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

All the info of my PC is here. I think you might be right; i might have typed it out wrong.
Also, this was all i could find about my PC due to the fact that my PC is part of a discontinued series.
 

UKickAss

Distinguished
Jul 17, 2013
97
1
18,645


Sorry if i wasn't very specific, but here's my MB model: IPISB-CH2 (Chicago)
 

Zerk2012

Titan
Ambassador
Yes that card will work and you will not saturate the PCI-E lane with that video card. It should be a really good upgrade enjoy!
Put the card in the top spot near the processor.
If you need to move the WIFI for the video card to fit just move the WIFI down to another spot.
 

endeavour37a

Honorable
Thanks, well back to my original post then :) Yes the 750Ti should work fine in the 1.0 x16 slot, it is not really a high performance card so it should not saturate the bus very much at all. Just FYI, PCIe slots and PCIe cards are all upward and backward comparable, as long as the physical slot is the same as the card edge connecter.
 
Solution

UKickAss

Distinguished
Jul 17, 2013
97
1
18,645


Ok i'll keep that in mind. Thanks for your help!
 

UKickAss

Distinguished
Jul 17, 2013
97
1
18,645


Ok, thanks for your advice!