- Oct 19, 2014
- 9
- 0
- 4,510
Let me explain..
Before i run any game , lets say diablo 3 or watch dogs or tomb raider...before i run any game my fps in afterburner or furmark runs about 107 fps ..this is crossfire setup 2x 7950 hd radeon.
So when i run a game with or without afterburner(I used afterburner just to see my cards temp, and those temps never got above 80 and few times near 85 but not above) the games run fine but after awhile and this differs a lot , sometimes hours others min..the game starts lag..and when i exit the game and check my fps in afterburner or furmark its dropped by half..67 or below 60 and wont go up to 107 again....only after i reset crossfire in ccc..meaning when i turn it off and back on again does my fps in afterburner or furmark go back to 107 fps..
My drivers are up to date i have no dust in my rig..i can't see that it should be an overheating problem as they don't get that warm..my power options are also set to performance...
Let me summarize..my fps locks to below 60ish after i play and exit any game and only restarting pc or turning crossfire off and back on does my fps go back to normal...
Any help, advice in detail would be most helpful as i have searched the net for this problem and can't find anything.
Before i run any game , lets say diablo 3 or watch dogs or tomb raider...before i run any game my fps in afterburner or furmark runs about 107 fps ..this is crossfire setup 2x 7950 hd radeon.
So when i run a game with or without afterburner(I used afterburner just to see my cards temp, and those temps never got above 80 and few times near 85 but not above) the games run fine but after awhile and this differs a lot , sometimes hours others min..the game starts lag..and when i exit the game and check my fps in afterburner or furmark its dropped by half..67 or below 60 and wont go up to 107 again....only after i reset crossfire in ccc..meaning when i turn it off and back on again does my fps in afterburner or furmark go back to 107 fps..
My drivers are up to date i have no dust in my rig..i can't see that it should be an overheating problem as they don't get that warm..my power options are also set to performance...
Let me summarize..my fps locks to below 60ish after i play and exit any game and only restarting pc or turning crossfire off and back on does my fps go back to normal...
Any help, advice in detail would be most helpful as i have searched the net for this problem and can't find anything.
Facebook
Twitter
Instagram