Upgraded my PC - Power does not turn on
- Thread starter Peturjos
- Start date
Solution
jerryvaberry
Honorable
- Jun 24, 2014
- 361
- 0
- 10,960
Maybe either the 24 pin connector from psu to mobo is not connected properly. Or the switch on the psu is still off.
[/i I removed all power cable from the motherboard, put a jumper between pin 15 and 16 in the 20 pin connector, then the fan started and I could mesure the voltage from the power supply, 3.4V, 5.0V and 11.8V.
Is lookes like the conection between pin 15 and 16 on the motherboard is missing. Is it OK for me to put a jumber between this pin in the plug.? Am I going to destroy anything on the motherboard If I do that.?
Is lookes like the conection between pin 15 and 16 on the motherboard is missing. Is it OK for me to put a jumber between this pin in the plug.? Am I going to destroy anything on the motherboard If I do that.?
TRENDING THREADS
-
-
News Firefox user loses 7,470 opened tabs saved over two years after they can’t restore browsing session- Started by Admin
- Replies: 58
-
-
News Apple debuts M4 processor in new iPad Pros with 38 TOPS on neural engine
- Started by Admin
- Replies: 80
Facebook
Twitter
Instagram