Hi,
I have recently built a PC for a friend (specs below) and it has a very odd issue which I am having trouble figuring out.
Basically when I initially put it together it had the issue of power cycling on and off about 4 times and then eventually posting to the Gigabyte BIOS with a message saying "BOOT failure detected please load optimized settings".
After I load optimized settings it runs and performs fine. Problem is after it is powered off and left over night the power cycling comes back.
I have updated the BIOS and now I no longer get the boot failure message but still get boot cycling about 4 times before it eventually loads and runs without issue.
The odd part is it only does this if the PC has been off for at least a few hours. If I turn off and leave for 10 minutes, then switch back on it loads fine without boot cycling.
Its quite odd, I'm not sure if its a strange power issue?
Any help would be great thanks
Gigabyte GTX 760 OC Windforce 2GB GDDR5
Gigabyte GA-Z87-DS3H Socket 1150 DVI HDMI 7.1 channel Audio ATX Motherboard
Intel Core i5 4670K 3.40GHz Socket 1150 6MB Cache
Corsair 8GB (2x4GB) DDR3 1600MHz Vengeance Memory Kit CL9 1.5V Corsair CX 750W Fully Wired 80+ Bronze Power Supply
Samsung 120GB SSD 840 EVO - SSD Only
Seagate 2TB BARRACUDA 3.5" SATA-III Hard Driv
I have recently built a PC for a friend (specs below) and it has a very odd issue which I am having trouble figuring out.
Basically when I initially put it together it had the issue of power cycling on and off about 4 times and then eventually posting to the Gigabyte BIOS with a message saying "BOOT failure detected please load optimized settings".
After I load optimized settings it runs and performs fine. Problem is after it is powered off and left over night the power cycling comes back.
I have updated the BIOS and now I no longer get the boot failure message but still get boot cycling about 4 times before it eventually loads and runs without issue.
The odd part is it only does this if the PC has been off for at least a few hours. If I turn off and leave for 10 minutes, then switch back on it loads fine without boot cycling.
Its quite odd, I'm not sure if its a strange power issue?
Any help would be great thanks
Gigabyte GTX 760 OC Windforce 2GB GDDR5
Gigabyte GA-Z87-DS3H Socket 1150 DVI HDMI 7.1 channel Audio ATX Motherboard
Intel Core i5 4670K 3.40GHz Socket 1150 6MB Cache
Corsair 8GB (2x4GB) DDR3 1600MHz Vengeance Memory Kit CL9 1.5V Corsair CX 750W Fully Wired 80+ Bronze Power Supply
Samsung 120GB SSD 840 EVO - SSD Only
Seagate 2TB BARRACUDA 3.5" SATA-III Hard Driv
Facebook
Twitter
Instagram