Need a CPU Cooler without a backplate

Toggle sidebar Toggle sidebar
ImDaBaron

ImDaBaron

Admirable
May 26, 2014
1,866
0
6,160
Hey guys...here's the deal. My FM2+ motherboard in my mITX build has a chip on the back.So any backplate will bend the motherboard.So yes the Hyper Evo 212 wont work(tried).This is for a 860K and a Bitfenix Prodigy case. Any suggestions? I know there are some out there but my research results have been minimal. I do plan to overclock.
 
Solution
O


That is the family of coolers I was meaning . They work well and are quiet .
The originals just used intel push pins and were criticized for that . A little research should tell you which models have no back plate .
It should install just like this on an AMD ...
Sort by date Sort by votes
ImDaBaron

ImDaBaron

Admirable
May 26, 2014
1,866
0
6,160
Upvote 0 Downvote
O

Outlander_04

Titan
BANNED
Nov 18, 2008
20,308
4
74,960


That is the family of coolers I was meaning . They work well and are quiet .
The originals just used intel push pins and were criticized for that . A little research should tell you which models have no back plate .
It should install just like this on an AMD , but check the hardware around the socket for height .
http://www.manualslib.com/manual/722255/Zalman-Cnps7500-Led.html?page=6#manual
The aluminium/copper models are cheaper and cool nearly as well
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom