i have an intex case that came with an intex psu 450wsingle 12v rail:18 amp,i am thinking to change the psu and get a quality psu, corsair vs550 watt psu now my concern is that will that psu fit in my case???? dimensions of my case is LxWxH: 36.5x17x33 cms. currently i'm running a microatx motherboard in the same case... and can you please tell me in which category does my Case belongs?
corsair vs550 watt psu compatibility with small cases
- Thread starter a_bista
- Start date
it is an intex case and and is quite small my psu measures WxHxL : 15x8.3x10 cm im so tensed for the height as 8.5 cm is the general size and my PSU'S height is about 2-3 cm from mobo if they both are connected wont it cause any problem....
notrix can you post your case pic????
notrix can you post your case pic????
it is an intex case and and is quite small my psu measures WxHxL : 15x8.3x10 cm im so tensed for the height as 8.5 cm is the general size and my PSU'S height is about 2-3 cm from mobo if they both are connected wont it cause any problem....
notrix can you post your case pic????
notrix can you post your case pic????
it is an intex case and and is quite small my psu measures WxHxL : 15x8.3x10 cm im so tensed for the height as 8.5 cm is the general size and my PSU'S height is about 2-3 cm from mobo if they both are connected wont it cause any problem....
notrix can you post your case pic????
notrix can you post your case pic????
it is an intex case and and is quite small my psu measures WxHxL : 15x8.3x10 cm im so tensed for the height as 8.5 cm is the general size and my PSU'S height is about 2-3 cm from mobo if they both are connected wont it cause any problem....
notrix can you post your case pic????
notrix can you post your case pic????
it is an intex case and and is quite small my psu measures WxHxL : 15x8.3x10 cm im so tensed for the height as 8.5 cm is the general size and my PSU'S height is about 2-3 cm from mobo if they both are connected wont it cause any problem....
notrix can you post your case pic????
notrix can you post your case pic????
- Oct 22, 2013
- 20,885
- 994
- 87,990
Can't you post one of you own case? maybe a link from a site where it is/was sold.
Those measurements need to be done again i think,they don't match any spec,could be atx as well as tfx. imo.
http://en.wikipedia.org/wiki/ATX
ko888
Titan
- Feb 18, 2009
- 16,708
- 41
- 84,990
From the ATX12V Power Supply Design the standard dimensions are:
150mm (W) x 86mm (H) x 140mm (D)
You've posted a depth dimension that seems shorter than ATX12V standard spec.
Based on all of the cabinets shown on the Intex web site they use a standard ATX12V (a.k.a. PS/2) form factor power supply unit (top mounted).
150mm (W) x 86mm (H) x 140mm (D)
You've posted a depth dimension that seems shorter than ATX12V standard spec.
Based on all of the cabinets shown on the Intex web site they use a standard ATX12V (a.k.a. PS/2) form factor power supply unit (top mounted).
first thing i have no intention for posting the same post again and again it was due to my network and speaking about my case it's model is Intex Supernova
one 5.25 inch external slots
three 3.5 inch internal slots
cpu heat vent
PCI graphic heat
heavy duty system
according to the specs in its carton its
net weight: 2.7 kg
gross weight 3.2 kg
size 37.4x 20.6x 41.2 cm
but actually when i measure it, it is a bit smaller like the above mentioned measurements...
but these case can fit a micro atx gigabyte ga-h61m-s1 mobo
im so confused.....
one 5.25 inch external slots
three 3.5 inch internal slots
cpu heat vent
PCI graphic heat
heavy duty system
according to the specs in its carton its
net weight: 2.7 kg
gross weight 3.2 kg
size 37.4x 20.6x 41.2 cm
but actually when i measure it, it is a bit smaller like the above mentioned measurements...
but these case can fit a micro atx gigabyte ga-h61m-s1 mobo
im so confused.....
Facebook
Twitter
Instagram