overclocking gigabyte 990fxa-ud3

Toggle sidebar Toggle sidebar
C

Countableslayer

Reputable
Nov 1, 2014
3
0
4,510
Hey, I'm new to overclocking and everything else about computers. this is the very first computer meant for gaming I had and I need help overclocking it, can somebody tell me good settings for it so it will be a little bit better?

GIGABYTE 990FXA-UD3
AMD Phenom II X$ 965 X4 965 Processor
G. Skill Ripjaws (2x 4Gb)
 
Solution
gskill support
Set up the RAM first:

1. Set DRAM Frequency to DDR3-1600

2. Set CPU-NB Frequency to 2400MHz (DDR3-1600 / 2 = 800MHz, then x 3) CPU-NB Frequency should always be 3X DRAM bus frequency

3. Set HT Link Frequency to 2400MHz

4. Set timings to tCL 9 - tRCD 9 - tRP 9 - tRAS 24, or whatever your memory is rated for.

5. Set DRAM Voltage to 1.50V, or whatever your memory is rated for.

6. Most CPUs will need a CPU-NB Voltage boost of +0.10V, so if your default is 1.10V, set it to 1.20V.
Sort by date Sort by votes
gskill support

gskill support

Splendid
Feb 27, 2012
2,916
109
24,390
www.gskill.com
Set up the RAM first:

1. Set DRAM Frequency to DDR3-1600

2. Set CPU-NB Frequency to 2400MHz (DDR3-1600 / 2 = 800MHz, then x 3) CPU-NB Frequency should always be 3X DRAM bus frequency

3. Set HT Link Frequency to 2400MHz

4. Set timings to tCL 9 - tRCD 9 - tRP 9 - tRAS 24, or whatever your memory is rated for.

5. Set DRAM Voltage to 1.50V, or whatever your memory is rated for.

6. Most CPUs will need a CPU-NB Voltage boost of +0.10V, so if your default is 1.10V, set it to 1.20V.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom