Build:
Asus Z87-A mobo
Intel i5-4590
Team Elite 8GB (2x4GB) DDR3
Corsair CX500M psu
Seagate Barracuda 1TB
Antec GX500 case
So the problem in a nutshell is that while trying to bench the system I keep getting a steady red cpu led on the board, nothing shows up on the monitor, and I get no beeps whatsoever.
I have the 24 and 8 pin power connected. I have the ram installed and I've tried 1, 2, and no sticks with no change. I have the processor and fan installed with fan power connected. After multiple checks of the cpu pins i can see nothing the matter (even used an mf glass to check really close). I tested the psu independent of everything else and it seems fine. I'm using the case buttons for pwr and reset if that makes a difference.
I get a green power led when the psu switches on and the cpu fan spins fast and quiet when I try to boot up. I've been troubleshooting as best i can but I'm out of ideas. If anyone could help I'd really appreciate it.
Asus Z87-A mobo
Intel i5-4590
Team Elite 8GB (2x4GB) DDR3
Corsair CX500M psu
Seagate Barracuda 1TB
Antec GX500 case
So the problem in a nutshell is that while trying to bench the system I keep getting a steady red cpu led on the board, nothing shows up on the monitor, and I get no beeps whatsoever.
I have the 24 and 8 pin power connected. I have the ram installed and I've tried 1, 2, and no sticks with no change. I have the processor and fan installed with fan power connected. After multiple checks of the cpu pins i can see nothing the matter (even used an mf glass to check really close). I tested the psu independent of everything else and it seems fine. I'm using the case buttons for pwr and reset if that makes a difference.
I get a green power led when the psu switches on and the cpu fan spins fast and quiet when I try to boot up. I've been troubleshooting as best i can but I'm out of ideas. If anyone could help I'd really appreciate it.
Facebook
Twitter
Instagram