How can I install video card drivers with my eyes closed?

paradigmArchitect

Reputable
Oct 16, 2014
21
0
4,520
With no onboard video, one needs a video card. With a video card, one needs video card drivers. How does one install said drivers without having them already installed to see?

EDIT: MY SCREEN IS BLACK. I have never seen a pixel from this system, it has never had video drivers installed.

FIXED: I was trying to use HDMI, apparently I needed to use the DVI port for first use, which was blocked by my case, unfortunately. I moved the graphics card to the 2nd slot (should probably move it back?) and I am able to get in now :) thanks
 
Solution
windows has built in generic drivers (or it should)...It allows you to display at 800x600 res. You may have to try booting into safe mode if this isn't a fresh install. Once you have the display going (you may also need to use DVI/VGA, no HDMI until you get drivers) you can get the drivers from the Nvidia/AMD website.
windows has built in generic drivers (or it should)...It allows you to display at 800x600 res. You may have to try booting into safe mode if this isn't a fresh install. Once you have the display going (you may also need to use DVI/VGA, no HDMI until you get drivers) you can get the drivers from the Nvidia/AMD website.
 
Solution

paradigmArchitect

Reputable
Oct 16, 2014
21
0
4,520


Nope, I've put in my graphics card, I have never had old ones installed. This is a new build.
 

Wolfshadw

Titan
Moderator
A graphics card will utilize the very basic video drivers included with your OS. They are enough to provide an image. Once installed and connected to the net, then you can download and install the necessary drivers from AMD/NVidia.

-Wolf sends
 

paradigmArchitect

Reputable
Oct 16, 2014
21
0
4,520


I don't know about you, but trying to install Windows without anything showing on the screen would be a little difficult.. I'm sure its possible though.
 

lullemannen90

Distinguished
Mar 22, 2014
130
0
18,760


The you need to download the drivers for your graphics card and install them.
 

paradigmArchitect

Reputable
Oct 16, 2014
21
0
4,520


I have no OS.
 

paradigmArchitect

Reputable
Oct 16, 2014
21
0
4,520


How can I install them? I can't even see into the BIOS.
 

Wolfshadw

Titan
Moderator


When you boot your system, basic graphic drivers are run so you can see the display.

-Wolf sends
 

Wolfshadw

Titan
Moderator


If you can't even see BIOS, then you have another issue. Please list your system components.

-Wolf sends
 

lullemannen90

Distinguished
Mar 22, 2014
130
0
18,760


Maybe there's something wrong with the videocard then, or the build itself.
 

paradigmArchitect

Reputable
Oct 16, 2014
21
0
4,520


EVGA Z87 Classified mobo, Devils Canyon i5 CPU, EVGA Geforece GTX 660 FTW Signature 2.. The motherboard is nice as it gives good diagnostic codes, like at first the RAM (runs at max voltage the mobo can take @ 2400) wasn't seated right and it caught that and reported an error code on an LED on the mobo itself specifying. I'm pretty sure it boots up normally, and no errors are reported.
 

paradigmArchitect

Reputable
Oct 16, 2014
21
0
4,520


There is no onboard video capabilities on the motherboard. I have to use the video card.
 

cklaubur

Distinguished


According to EVGA, there is a pair of Mini DisplayPort connectors on the back panel. However, unless you have one of the few monitors with DisplayPort support or are using an adapter, that still leaves you with having to use the video card. I assumed where I shouldn't have.

You should be able to at least see the BIOS since drivers are not required for that, only a functional video controller.

Casey