Ive assembled my new build and cannot get post or bios display.
When powering on backup bios all components run but no display through onboard or external video.
No debug codes show
I've tried booting in all dual bios switch settings. If not booting from backup bios components power on and shot down a second after and repeat this cycle flashing red on the debug screen.
I've tried the troubleshooting sticky and all cables are connected.
I've tried swapping video cards, using ram in different slots, all dual bios switch settings, with and without ssd connected.
I plan to take it all out and check for unnecessary stand offs, check the cpu is seated correctly
Components:
Cpu: i7-4790k lga1150
Cpu cooler: nzxt krakenx61
Mobo: gigabyte z87x ud4h
Ram: hyper x fury 16gb(2x8) 1866ddr3 (x2 32gb)
Hdd: a data sp900 256gb ssd x2
Seagate 3000gb barracuda x2
Gpu: msi r7 265 x2
Psu: antec hcg 850m
Case: nzxt h440
When powering on backup bios all components run but no display through onboard or external video.
No debug codes show
I've tried booting in all dual bios switch settings. If not booting from backup bios components power on and shot down a second after and repeat this cycle flashing red on the debug screen.
I've tried the troubleshooting sticky and all cables are connected.
I've tried swapping video cards, using ram in different slots, all dual bios switch settings, with and without ssd connected.
I plan to take it all out and check for unnecessary stand offs, check the cpu is seated correctly
Components:
Cpu: i7-4790k lga1150
Cpu cooler: nzxt krakenx61
Mobo: gigabyte z87x ud4h
Ram: hyper x fury 16gb(2x8) 1866ddr3 (x2 32gb)
Hdd: a data sp900 256gb ssd x2
Seagate 3000gb barracuda x2
Gpu: msi r7 265 x2
Psu: antec hcg 850m
Case: nzxt h440