Case wire connections Need help quick

DeumBelli · Nov 15, 2014

I have a few wires left to plug in and im not sure where they go. I have nzxt h440, z97 gaming 5 motherboard, and 750 evga supernova g2. I dont know where to plug in the hd audio cable from the case and how to hook up the 4 case fans. Can someone help me as soon as you can?

DonkeyOatie · Nov 15, 2014

That's the MSI board right? It has five fan headers on it, so you could put one fan on each one. What HD audio are you talking about?

DeumBelli · Nov 15, 2014

DonkeyOatie :

I found wht to do with the audio connector but for the fans all i see is a molex plug ( i think thats what its called)

DonkeyOatie · Nov 15, 2014

How many CPU fan connections are you using?

DeumBelli · Nov 15, 2014

i have the cpu fan plugged into the cpu fan on the motherboard but idk what to do with the 4 case fans all i see is a molex plug and one small 3 pin cable. Can i just plug the molex into my psu and the fans would work?

DonkeyOatie · Nov 15, 2014

Can you see the four pin header labelled SYSFAN1 on the CPU side of the first small PCI-e slot?

Look at this link down the page. http://www.pcper.com/reviews/Motherboards/MSI-Z97-Gaming-7-Motherboard-Review/Features-and-Motherboard-Layout

or SYSFAN2 in the corner of the board by the M2 slot, between JFP1 and JFP2

SYSFAN3 is right beside the DIMM behind the 24 pin main power plug.

DeumBelli · Nov 15, 2014

DonkeyOatie · Nov 15, 2014

Is that OK?

DeumBelli · Nov 15, 2014

I still have the problem of only seeing the molex cable for the fans. Am i supposed to use that since in the case manual it says the molex is connected to the fan hub? Because i dont see anything else to plug in.

DonkeyOatie · Nov 15, 2014

Sorry, I misunderstood your question. You want to know how to plug the in-case fan controller to the motherboard, right?

DeumBelli · Nov 15, 2014

I was wondering if i had to do that for this case. Should i just use the molex to make things easier for me since this is my first time?

DonkeyOatie · Nov 15, 2014

The Molex is intended to be plugged into one of the power supply cables, not the motherboard. This has the fans running full power.

Read this thread http://www.tomshardware.com/answers/id-2058046/nzxt-h440-fans.html

and this case review

http://www.gamersnexus.net/hwreviews/1335-nzxt-h440-specs-review-benchmark

DeumBelli · Nov 15, 2014

So i do have to use the molex?

DonkeyOatie · Nov 15, 2014

If you want to use the on-board fan controller, yes, I think so. You will need to plug the Molex connector from your fan controller into a Molex connector on one of your power supply cables.

you could unplug your fans from the controller and plug each one into the motherboard using one of the fan headers.

Search

Case wire connections Need help quick

DeumBelli

Distinguished

DonkeyOatie

DonkeyOatie

Champion

DeumBelli

Distinguished

DonkeyOatie

Champion

DeumBelli

Distinguished

DonkeyOatie

Champion

DeumBelli

Distinguished

DonkeyOatie

Champion

DeumBelli

Distinguished

DonkeyOatie

Champion

DeumBelli

Distinguished

DonkeyOatie

Champion

DeumBelli

Distinguished

DonkeyOatie

Champion

TRENDING THREADS

Latest posts

Moderators online

Share this page