Increase Ram frequency

Toggle sidebar Toggle sidebar
D

Daryl Dixon

Reputable
May 16, 2014
51
0
4,630
Hello Everyone .
I have Ram Kingstone HyperX.. kHX1600C10D3/8GX
on Motherboard Asus A55BM-A/USB3
With Apu AMD A6-6400k.
Ram Frequency Is 1333.
I Want To Know If I Can Change It To 1600 And How Can I Do That ?
Please Advice :)
Thanks In Advance
 
Solution
H
When you activate 1600MHz memory setting in the bios, the memory profile including appropriate timings for the new speed setting are automatically applied.

This is not considered as overclocking. If everything works as intended, you will not get any problems.

In the worst case scenario, your computer will refuse to boot. In that case you can simply reset the cmos on the motherboard, which resets all bios settings to their default state, including the original 1333Mhz that the memory was running at.
Sort by date Sort by votes
H

huilun02

Splendid
Feb 29, 2008
4,324
0
24,960
That's strange. Have a look in the BIOS to see if enabling XMP profiles will let you run it at 1600MHz.

To enter the BIOS, mash the Delete button when the system is booting.

I can't tell you exactly where you will find the setting because the BIOS can have different layout for different boards.
 
Upvote 0 Downvote
D

Daryl Dixon

Reputable
May 16, 2014
51
0
4,630
i think there is a numbers that i should change it in DRAM Timing When I Go To 1600mhz .
And Another Question . When i Change It To 1600Mhz There Will Be Any Risk ? I Heared Somthing About Overclock Risk So I Want To Know And Make Sure That Will BE Safe
 
Upvote 0 Downvote
H

huilun02

Splendid
Feb 29, 2008
4,324
0
24,960
When you activate 1600MHz memory setting in the bios, the memory profile including appropriate timings for the new speed setting are automatically applied.

This is not considered as overclocking. If everything works as intended, you will not get any problems.

In the worst case scenario, your computer will refuse to boot. In that case you can simply reset the cmos on the motherboard, which resets all bios settings to their default state, including the original 1333Mhz that the memory was running at.
 
Upvote 0 Downvote
Solution
D

Daryl Dixon

Reputable
May 16, 2014
51
0
4,630
i did it and my pc started normaly . this ram should run with cas latency 10 when 1600Mhz But it Still on 9 Cas Latency . Is That Normal . And Just Wonder If I May Face Any Problem later? Or It's Fine As The Pc Started Normaly
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom