Hello all! I'm running the Intel XTU stress test in the background right now on my air cooled I5 4690k @ 4.4ghz. I'm using a Zalman CN10PX heat sink and it is massive set up for pushing air out. First and foremost I'd like to thank everyone on this forum, you guys have guided me on my first PC build and will continue to guide me with everything else and I thank you for that.
So my question is, when I ran prime95 at 4.2 ghz after 10 minutes I reached 94C and I freaked out and stopped the test and shut my computer down. I went back into the bios and lowered the clock back to stock. Now what I'm saying now contradicts what I said up top, the reason being is that I did some research and found that Prime95 can cause fluctuations in voltage, sure enough my voltage was fluctuating the next time I tried it on prime 95 (monitoring with HWMONITOR). So, I'm using Intel XTU and the temps are remaining under 70c consistently at 4.4 ghz, am I safe to assume I'm going to be ok with this OC if it lasts IN XTU for 8 hrs? Or should I have a clock that maintains safe levels in prime95?
Edit: Forgot to add there are large fluctuations in temperatures running XTU it will go from 64C to 56c and so on is that okay? Last edit I promise, I'm running 1.250 Vcore Volts.
So my question is, when I ran prime95 at 4.2 ghz after 10 minutes I reached 94C and I freaked out and stopped the test and shut my computer down. I went back into the bios and lowered the clock back to stock. Now what I'm saying now contradicts what I said up top, the reason being is that I did some research and found that Prime95 can cause fluctuations in voltage, sure enough my voltage was fluctuating the next time I tried it on prime 95 (monitoring with HWMONITOR). So, I'm using Intel XTU and the temps are remaining under 70c consistently at 4.4 ghz, am I safe to assume I'm going to be ok with this OC if it lasts IN XTU for 8 hrs? Or should I have a clock that maintains safe levels in prime95?
Edit: Forgot to add there are large fluctuations in temperatures running XTU it will go from 64C to 56c and so on is that okay? Last edit I promise, I'm running 1.250 Vcore Volts.