Where to Install Motherboard Drivers on new PC build

AWadd618

Distinguished
Feb 9, 2010
7
0
18,510
Hello, thanks for reading.

I just built my 3rd PC, mainly gaming-oriented, a couple days ago. From the get-go, I installed only the LAN driver from the Mobo disc so I could get access to the updated drivers for my GPU and Mobo on the manufacturer websites.

What I am wondering is where on my PC (as in, what drive and folder/location) to install the physical drivers. For instance, I downloaded the LAN, USB, SATA, and Chipset drivers as .zip files and right now they're just sitting there waiting to be extracted/installed. When I extract them, where on my HDD or my SDD should I put them? Does it matter?

Additionally, I was a bit confused when actually scrolling through my Mobo's list of available drivers on the Asus site. For instance, the Chipset section doesn't really include anything called a "Driver", but rather:

1.) Intel(R) Chipset Software Installation Utility V10.0.14 for Windows 7/8/8.1 32bit & 64bit.(WHQL)
2.) Intel(R) Management Engine Interface V10.0.0.1204 for Windows 7/8/8.1 32bit & 64bit.(WHQL)

Do I need those two items? There's a lot of files on there and again, some of them don't actually say "driver", so I'm a little unclear on what I need and where to put them.

Thanks in advance for reading and any help.
 
Solution
extract them anywhere--easiest to make a new folder on the desktop and extract them to that

once extracted there will be an executable setup/install file to run

you can delete the new folder and its contents once you install them all

yes install items 1 and 2
extract them anywhere--easiest to make a new folder on the desktop and extract them to that

once extracted there will be an executable setup/install file to run

you can delete the new folder and its contents once you install them all

yes install items 1 and 2
 
Solution

AWadd618

Distinguished
Feb 9, 2010
7
0
18,510


Thanks, sounds straightforward!
 


yes it is

you may see two setup files--one asus one and one just called setup/install

either should work