Well i bought a new mobo since my old one broke. Everythings was going well till i was about to add the cpu cooler. It just wont fit. The plugs are in place, but they wont go in the holes. I can press as hard as i can. They wont fit. Any idea's? (And can i let the thermal paste on the cpu for 24 hours without cooler)
CPU cooler wont fit.
- Thread starter deadba5
- Start date
Is the cooler a Coolermaster Hyper 212 evo?
You mobo - http://www.asrock.com/mb/Intel/Z77%20Extreme4/?cat=Specifications - is LGA1155.
The evo - http://www.coolermaster.com/cooling/cpu-air-cooler/hyper-212-evo/ - fits lga1155
So there shouldn't be a problem. You using the right fittings?
The cooler also has 37mm clearance under it. Corsair Vengeance - http://www.corsair.com/en/memory/vengeance - is only 26.25mm high so that shouldn't be a problem either.
You haven't posted your case make and model. You'll have to check that yourself.
You mobo - http://www.asrock.com/mb/Intel/Z77%20Extreme4/?cat=Specifications - is LGA1155.
The evo - http://www.coolermaster.com/cooling/cpu-air-cooler/hyper-212-evo/ - fits lga1155
So there shouldn't be a problem. You using the right fittings?
The cooler also has 37mm clearance under it. Corsair Vengeance - http://www.corsair.com/en/memory/vengeance - is only 26.25mm high so that shouldn't be a problem either.
You haven't posted your case make and model. You'll have to check that yourself.
TRENDING THREADS
-
-
-
-
-
Discussion What's your favourite video game you've been playing?- Started by amdfangirl
- Replies: 3K
-
Facebook
Twitter
Instagram