Massive BSOD Problem.

Kraknel

Reputable
Nov 20, 2014
5
0
4,510
Now first let me say i have no experience with BSODs and have been lucky enough to never have had a problem with them before. For over a month now i have had a horrible bsod problem, seemingly random crashes. It started when i upgraded my PC, original system config :

Windows 7 Ultimate 64bit
AMD Phenom II X6 1090T Thuban
Gigabyte GA-780T-D3L Motherboard
Sparkle Nvidia GTS 450 GPU
4gb(2x2gb) Kingston KVR1333D3n9 ram
450w PSU

I upgraded my GPU to a Gigabyte Nvidia Geforce GTX660, the ram to 8gb (2x4gb) from Crucial ( BLS2C4G3D18ADS3CEU) and got a 650w psu incase i needed extra power. After a few weeks the buggy BSODs started, all random crashes at different times. At first i thought maybe i had brought a cheap PSU and after reading some bad reviews about it i sent it back and got a new Corsair Builder Series 600W. The BSODs continued. Next i assumed it would be the ram, i sent it back and got the same replacements. Still happening, so i sent them back and got instead 2x4gb Corsair CMX8GX3M2A1600C11 memory. The problem persisted. I tried numerous clean installs of windows before sending the GPU back and getting a new ASUS Geforce GTX 760 DirectCUII. Again the problems carried on. So i assumed maybe its the motherboard so i got a new on of those, an MSI 970A-G43. Also i brought a new copy of windows Windows 7 Home Premium 64 bit. Installed those and crossed my fingers. To no avail, it is still happening. The only things left are the processor and HDD, both of which are only a couple of years old and the CPU has never been overclocked. Now before i go shelling out even more cash to be disappointed i thought i would try here to see if anyone can shed some light on it as it is driving me insane. current system config :

Windows 7 Home Premium 64bit
AMD Phenom II X6 1090T Thuban
MSI 970A-G43 Motherboard
ASUS Geforce GTX 760
8gb (2x4) Corsair CMX8GX3M2A1600C11 ram
Corsair Builder 600w PSU

It has blue screened 3 times in last 24 hours since installing the motherboard and new version of windows (please note all windows i use are 100% originals), i have all 3 dumps, how do i upload them for people to look at (first post here).
 

Kraknel

Reputable
Nov 20, 2014
5
0
4,510
Took the following from bluescreenview, is this what you needed? (apologies if not) :

112014-33836-01.dmp 20/11/2014 21:30:49 PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 ffffda80`0a309840 00000000`00000000 fffff800`02cc47f5 00000000`00000007 ntoskrnl.exe ntoskrnl.exe+80640 NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.18247 (win7sp1_gdr.130828-1532) x64 ntoskrnl.exe+80640 C:\Windows\Minidump\112014-33836-01.dmp 6 15 7601 291,664 20/11/2014 21:32:34
112114-29312-01.dmp 21/11/2014 18:07:21 PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 ffffda80`06d02190 00000000`00000000 fffff800`02ce9fe5 00000000`00000007 ntoskrnl.exe ntoskrnl.exe+75bc0 NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.18247 (win7sp1_gdr.130828-1532) x64 ntoskrnl.exe+75bc0 C:\Windows\Minidump\112114-29312-01.dmp 6 15 7601 291,880 21/11/2014 18:10:03
112114-27268-01.dmp 21/11/2014 20:55:57 IRQL_NOT_LESS_OR_EQUAL 0x0000000a ffffda80`06aa6458 00000000`00000002 00000000`00000000 fffff800`02caac24 ntoskrnl.exe ntoskrnl.exe+75bc0 NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.18247 (win7sp1_gdr.130828-1532) x64 ntoskrnl.exe+75bc0 C:\Windows\Minidump\112114-27268-01.dmp 6 15 7601 291,664 21/11/2014 20:57:24


Furmark run fine for 10 minutes and max GPU temp was 69d
Crystaldisk reported no errors and temp was 29d
I have run the windows Memory test tool a few times and its reported no problems, and i have run memtest86+ on two occasions for 6 hours at a time with no problems reported.
 

Kraknel

Reputable
Nov 20, 2014
5
0
4,510
Furmark ran fine, no problem. I last ran a windows memtest a few hours ago. I last ran the last Memtest86+ a few weeks ago after i had installed my current ram, again no problems.
 
OKay, we're going for the software, please try the following stuff, in current order:

1. uninstall Your current AVS, if it happens to be TrendMicro, or McAfee, please use proper removal tool to clean "mess" left after these two particular AVS.
2. restart Your computer
3. Install Kaspersky Pure trial
4. run full scan
5. use HitmanPro [trial], and MalwareBytes [free] with full scans.
6. after full scan of Kaspersky Pure and HitmanPro with Malwarebytes, open "cmd" [command line] as administrator, and write there: "sfc /scannow" let it do it's job, restart Your computer.

Also, do You have installed some third party apps for mouse/keyboard/sound card, or anything, that's not quite default? Many of these programs tend to do these things, bsodding, like webcam software, etc.
 

Kraknel

Reputable
Nov 20, 2014
5
0
4,510
Sorry for the late reply guys, (working shifts!)
OK i ran another memtest86+, suddenly a huge list of errors popped up after just 10 minutes running. So after a bit of swapping in and out i found that one of the sticks was faulty. So i have sent the mem back and i am going to get new memory today. It could be that i have had a bizarrley unlucky run with all the new ram i have had, so i shall install it when i get it (yes i use an ESD strap when installing ram) and then report back here on what happens. Thanks for all your help so far, much appreciated.