Second internal HDD not powering on

pinkmink

Reputable
Nov 21, 2014
1
0
4,510
Alright. A while back I installed a GTX780 into my computer. Worked fine for a while but then my computer randomly started shutting itself down. Thinking it was the PSU crapping out, I replaced it. Now, ever since I have replaced this PSU, I have no longer been able to get my second internal HDD to work (it doesn't show up in disc management or the bios). My operating system (Windows 7 64bit) is on the main SSD which does work without any issues. I know the second HDD works because I put it into a spare computer and it worked fine. I also tried putting a completely different HDD (brand new) into my computer, just in case, and that one did not work either.

Since this problem has started, I have also replaced the motherboard itself. Same issue even with the new motherboard. I've also tried different sata and data cables.

The only thing I haven't tried yet was swapping in a different power supply because I do not have another one on hand, but could the new PSU really be the issue? The computer itself works fine, as far as I can tell since I haven't tried to play any games or anything, but I just cannot get that second HDD to work. The external HDD I plugged into the USB worked fine, and I was able to pull some stuff off my SSD, but this second internal HDD has just got me stumped.

Current set up;
GIGABYTE GA-Z97X-Gaming 5
i5 4670k
Adata s510 120gb
WD BLACK SERIES WD1003FZEX 1TB (new HDD i want to use)
Corsair 850hx PSU
gtx780 GPU
 
Solution
Swap your power and sata cables from your main ssd to your secondary hard-drive and vice versa, that should tell you if you have a bad drive or not. It's possible that the bad PSU fried your hard-drive. When you swap the cables, only move them at the drives, not on the motherboard, you might not be able to boot but if you try to install/interact with the hard-drive you should find out all you need to know.

If you have data on the hard-drive that you have to have back and it ends up being fried, you can swap the PCB out with another from the same generation drive and you might get it working long enough to get the data off.

APassingMe

Reputable
Aug 25, 2014
613
0
5,160
Swap your power and sata cables from your main ssd to your secondary hard-drive and vice versa, that should tell you if you have a bad drive or not. It's possible that the bad PSU fried your hard-drive. When you swap the cables, only move them at the drives, not on the motherboard, you might not be able to boot but if you try to install/interact with the hard-drive you should find out all you need to know.

If you have data on the hard-drive that you have to have back and it ends up being fried, you can swap the PCB out with another from the same generation drive and you might get it working long enough to get the data off.
 
Solution